PX-24 Industrial Strength Protective Lubricant

Formulated specifically to meet the exacting standards of Military maintenance personnel. PX24 is a multi-purpose lubricant, corrosion inhibitor, dewatering and protective fluid. It is ideal for use on all mechanical and electrical equipment and as a penetrant will quickly free seized nuts, bolts and bearings.



Meets military spec Def. Stan 68-10 issue 4 PX24, NATO Code C-634 and Augusta Westland approved: WHPS 158. Copper corrosion - IP 154 max 1; no pitting or etching. Water Displacement - Complete Displacement of NaCI test solution (IP 178). Corrosion Protection - Pass/No Corrosion (IP 178). No adverse effects on rubber, paintwork or plastics and acrylic sheet polyester, glass fibre laminate, vinyl sheet and ebonite after immersion for 240 hours. Wide operational temperature range.

Ambersil White Spray Grease

Safe on metals, alloys and most paints, rubbers and plastics.
Resists water wash-off.
Protects against corrosion.

Heavy Duty Silicone Release Spray

Heavy duty Silicone lubricant and Release agent. Formulated with a high silicone content. The product is suitable for a wide range of uses. A dry non-oily, non-greasy product. Water clear with no odour. Size: 500ml aerosol.

Solent Flaw Detector Inspection System

Fast reliable method for visually inspecting and spot-checking surfaces of welds, exotic alloys or standard metals, highly stressed structural members, critical castings, shafts, gears, spindles, and any other hard part where identification of surface flaws is essential. Detects flaws such as cracks, pin holes, welding laps and porousness either during manufacture or on site. A three part system. SFD-501C is a cleaner. SFD-502C is a dye penetrant. SFD-503C is a developing fluid that reacts with the dye in SFD-502C to show small cracks in the weld. Each part supplied in an ozone friendly 500ml aerosol.

Flaw Detector Dye Penetrant

Highly sensitive red dye, for use when detecting flaws on metal components under normal lighting conditions.

Action Can Maintenance Sprays & Lubricants

AC-90 Displaces water, starts wet engines, penetrates rust, protects from corrosion, lubricates and stops squeaks. Silicone free, electrically non-conductive and can be used on or near electrical components, motor circuits etc, without affecting insulation or causing short circuits.

Available in aerosols that use no CFC?s and are ozone friendly with new CO2 Propellant, or in screw top metal cans and drums.

Does Not Contain Kerosene, Paraffin, Silicone or Naphtha. Contains up to 20% more product than comparable butane propellant products.

Anti-Seize Compound

Smooth copper containing paste prevents corrosive seizure of screw threads and eases assembly and dismantling of components. Protects against dirt, moisture and chemicals. High temperature performance 1100C.

40 Protective Lubricant

Suitable for protection against corrosion, water displacement, lubrication and flash rust removal.
* Quickly frees seized nuts, bolts and bearings
* High corrosion protection and water displacement properties - Passes IP 178, Methods A and B
* Remains operational at sub-zero temperatures
* Non conductive film
* Safe on most paints, rubbers and plastics
* Rolls Royce Approved 1036J
*Treated metals resist finger printing and remain bright even in highly corrosive conditions.

Rustilo DWX Rust Preventatives

A powerful solvent deposited rust preventive with excellent dewatering properties. The solvent, after evaporation, leaves a soft greasy protective film. Rustilo DWX rapidly removes water from components subsequent to metal treatment processes such as electroplating processes after machining, using soluble cutting fluids or parts that have been washed. Can be applied by brushing or spraying, it's dewatering action is most effective if the articles to be protected can be immersed in a dip tank.

Features:
Forms even film.
Fingerprint suppressant.
Excellent water displacing and penetrating properties.
High stability against acidic and alkaline contaminations.
Long bath-lifetimes possible.
Economical in application.
Removal: If required protective films of Rustilo DWX 31 can be removed by using a petroleum solvent or alkaline process cleaner.

Rustilo DWX 30

The very thin residual film provides effective medium term protection against corrosion during intermediate storage or transportation. Rustilo DWX 30 can also be used as a lubricant for mild press working, where corrosion protection without further treatment is required.
Protection:
Indoors - 9 months.
Outdoors - 3 months (Assumes primary protection from a tarpaulin or other cover).

Corrosion Inhibitor

Anti-corrosion treatment. A clear protective coating that provides long lasting protection against rust and corrosion on internal and external metallic components.



Film will not harden or crack. Suitable for protection of ferrous metals in conditions of high humidity. Film allows for subsequent handling and resists acid finger printing. Forms a continuous homogenous film. Will not stain or mark components. Removes surface moisture on application. Suitable as anti-seize coating on bolts, hinges, fixings and moving parts. Meets MIL-PRF-16173E (Class I, Grade 2). Passes IP 178, Method B. 250 Hours minimum protection (ASTMB117) in salt spray tests.

Solent? Dry Moly EP Lubricant

The molybdenum disulphide lubricant particles are one micron or less in size allowing the product to adhere in the smallest surface irregularities. Fast drying at room temperature, the dry coating can be polished if required, to a high shine providing micro coating of lubricant for slides, bearings, chutes and conveyors. The dry film is resistant to pick up and resists the accumulation of debris. Ideal for fastener lubrication where it will prevent galling, particularly on stainless steel. Effective on foundry equipment where high temperatures up to 450C are common. Also suitable for open gear lubrication and any location where a wet coating is not acceptable or would burn off. Provides lubrication at extremely high load rates up to 100,000 psi. Suitable for all steels, copper, and brass components. No silicone content. Packed in a 500ml aerosol for economy in use.