Ambersil Flaw Detector

Quick drying solvent cleaner/degreaser and excess
penetrant remover for the non-destructive testing of metal
surfaces by liquid penetrant inspection. The control is carried out using 3 products: Flaw Detector Cleaner, Flaw Detector Penetrant and Flaw Detector Developer.
Flaw Detector Cleaner is a fast drying, powerful degreasing solvent for the removal of dirt, grime and contaminants. Designed for the pre-treatment of the surface, prior to liquid
penetrant inspection and to remove all visible, colored traces of the penetrant.

Ambersil Flaw Detector Developer No.3

Ambersil Leak Detector

Water based formulation, no oils, silicones or harmful solvents; no run-off hazard.
Non-flammable and completely odourless.
Highlights all leaks even under low pressure.
Stable, does not break down in use.
Removes the need for sophisticated electronic equipment or immersion tanks.
Fitted with 360 degree spray system for all angle use.
Aerosol meets DIN 30657.
Aerosol meets the requirements of BS EN 14291:2004.
Can be used on oxygen systems.

Gear & Wire Rope Lubricant

A fast drying, high solids, high penetrating lubricant that forms a tough, durable barrier against corrosion, abrasion, dust absorption, water wash off and extremes of temperature.
Suitable for use on gears in motion.
Size: 400ml

Ambersil 40 Protective Lubricant Spray

Provides a waterproof coating protects against moisture attack, humidity and oxidisation. Damp proofs and protects ignition systems and all electrical equipment.

Corrosion Inhibitor

Anti-corrosion treatment. A clear protective coating that provides long lasting protection against rust and corrosion on internal and external metallic components.



Film will not harden or crack. Suitable for protection of ferrous metals in conditions of high humidity. Film allows for subsequent handling and resists acid finger printing. Forms a continuous homogenous film. Will not stain or mark components. Removes surface moisture on application. Suitable as anti-seize coating on bolts, hinges, fixings and moving parts. Meets MIL-PRF-16173E (Class I, Grade 2). Passes IP 178, Method B. 250 Hours minimum protection (ASTMB117) in salt spray tests.

Ambersil Flaw Detector

Quick drying solvent cleaner/degreaser and excess
penetrant remover for the non-destructive testing of metal
surfaces by liquid penetrant inspection. The control is carried out using 3 products: Flaw Detector Cleaner, Flaw Detector Penetrant and Flaw Detector Developer.
Flaw Detector Cleaner is a fast drying, powerful degreasing solvent for the removal of dirt, grime and contaminants. Designed for the pre-treatment of the surface, prior to liquid
penetrant inspection and to remove all visible, colored traces of the penetrant.

Ambersil Flaw Detector Penetrant No.2

40 Protective Lubricant

Suitable for protection against corrosion, water displacement, lubrication and flash rust removal.
* Quickly frees seized nuts, bolts and bearings
* High corrosion protection and water displacement properties - Passes IP 178, Methods A and B
* Remains operational at sub-zero temperatures
* Non conductive film
* Safe on most paints, rubbers and plastics
* Rolls Royce Approved 1036J
*Treated metals resist finger printing and remain bright even in highly corrosive conditions.

PX-24 Industrial Strength Protective Lubricant

Formulated specifically to meet the exacting standards of Military maintenance personnel. PX24 is a multi-purpose lubricant, corrosion inhibitor, dewatering and protective fluid. It is ideal for use on all mechanical and electrical equipment and as a penetrant will quickly free seized nuts, bolts and bearings.



Meets military spec Def. Stan 68-10 issue 4 PX24, NATO Code C-634 and Augusta Westland approved: WHPS 158. Copper corrosion - IP 154 max 1; no pitting or etching. Water Displacement - Complete Displacement of NaCI test solution (IP 178). Corrosion Protection - Pass/No Corrosion (IP 178). No adverse effects on rubber, paintwork or plastics and acrylic sheet polyester, glass fibre laminate, vinyl sheet and ebonite after immersion for 240 hours. Wide operational temperature range.

Ambersil® Battery Terminal Protector

Battery terminal protector is an anti-corrosion treatment for battery terminals with added acid leak detector. If battery acid comes into contact with the terminal protector, the coating will change colour to indicate acid leakage. Prevents corrosion and wear to terminals and clips. Specifically formulated for automotive applications. 500ml.

Ambersil Chain Spray

Chain and drive, heat dissipating lubricant, specifically developed for chain lubrication in conjunction with the manufacturers of the fork lift trucks. Offers maximum adhesion to chain links. Resists water wash off' and dust absorption and can be applied to running chains. High temperature resistance up to 300C. Meets military specifications - Def. Stan D/DQA/TS/CS/217/1. Pencil jet spray pattern to facilitate accurate application.
Size: 400ml.