Interchangeable Rod Type

These are lightweight, well balanced and rigid. Satin-chrome finish with hardened, ground and lapped measuring screw. Each micrometer of less than 300mm (12") is supplied with convenient handle to reach into deep holes. The set also includes spacing collar, a series of precision measuring rods and a dull chrome plated micrometer head. Spacing collars are designed for making up for the limited stroke of the micrometer head. Each rod marked with length. Easily reset - adjustment positive and permanent. Anvil is made from high grade steel, hardened, precision ground, micro-lapped and adjustable. Spanner wrench supplied with each micrometer. Accuracy: Instrument Error: /-(6L/50) mu m; L maximum measuring length

Series 141

Micrometer Heads

Spindle Diameter: 6.35mm - Tungsten Carbide Tipped. Spindle Housing Diameter: 10mm. Spindle Pitch: 1mm/.025mm. Main Body Diameter: 18mm. Overall length: 109mm. Accuracy (full scale): Metric: /-2 mu m Imperial: /-0.0001"

Series 150

Enamel Finish Interchangeable Anvil Micrometers

With one-piece carbide tip spindle and interchangeable hardened anvils with ground threads. Micro-lapped anvil and spindle faces, perforated frame with enamel finish. Supplied with standards, ratchet stop, positive locking clamp and supplied in a wooden or plastic (depending on size) storage case. Accuracy: Flatness: 0.6mm up to 300mm, 1.0mm up to 300 - 1000mm. Parallelism: (2L/100)mm (fraction rounded down.) Instrument Error: /-(4L/75)mm (fraction rounded up.) L maximum measuring length.

Series 104

Point Micrometers - Enamelled Frame

With 15 or 30 Pointed Anvils (0.3mm Point Radius), for measuring in areas of restricted access. Quick and easy wear adjustment, positive locking clamp and ratchet stop. Accuracy: Parallelism: 3 mu m. Instrument Error: (2L/75) mu m (fraction rounded up). Graduation: 0.001" (0.01mm) L Maximum measuring length. 1"/25mm 55.3mm, 2"/50mm 80.3mm

112 Series

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Hub Micrometers - Enamelled Frame

Tungsten carbide tipped measuring faces. Clear graduations on satin chrome finish.
Accuracy:
Parallelism: (2+L/100)mm.
Flatness: 0.6mm.
Instrument Error: 0-75mm ±2µm, 75-100mm ±3µm.

L = maximum measuring length.

Series 147

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)