Screw Thread Micrometer

Interchangeable V-anvils allow various pitches to be measured with a single micrometer. With ratchet stop. Accuracy: 0-75mm /-4 mu m, 75-100mm /-5 mu m. Anvils supplied separately.

126 Series

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Satin Chrome Finished Frame

Applications include measuring wall thickness of cylinders and tubes, shoulder to edge distance, rivet head height etc., accomplished using the: standard flat anvil, rod anvil, or optional V-anvil. Easily interchanged, with constant force ratchet and positive locking clamp. Quick and easy zero adjustment. Interchangeable anvils supplied: Flat anvil: (201216). Rod anvil: (201217) 3mm diameter for 0-25mm/0-1", (201379) 5mm diameter for 25-50mm/1-2". V-anvil: (201218) Available at extra cost. For measuring thickness of screw, shoulder length etc. Accuracy: Flatness: 2mm (Anvil Face), 0.6mm (Spindle Face). Parallelism: 3mm. Instrument Error: /-4mm.

Series 117

Interchangeable Rod Type

These are lightweight, well balanced and rigid. Satin-chrome finish with hardened, ground and lapped measuring screw. Each micrometer of less than 300mm (12") is supplied with convenient handle to reach into deep holes. The set also includes spacing collar, a series of precision measuring rods and a dull chrome plated micrometer head. Spacing collars are designed for making up for the limited stroke of the micrometer head. Each rod marked with length. Easily reset - adjustment positive and permanent. Anvil is made from high grade steel, hardened, precision ground, micro-lapped and adjustable. Spanner wrench supplied with each micrometer. Accuracy: Instrument Error: /-(6L/50) mu m; L maximum measuring length

Series 141

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Tubular Extension Sets - Pipe Type

Each set consists of inside micrometer head and a series of extension pipes of different length, which are hardened, ground, micro-lapped and heat insulated. Satin chrome finished head with positive locking clamp and carbide measuring faces. All sets include micrometer head. Accuracy: Micrometer head stroke: 25mm (1"). Graduation: 0.01mm (.001"). Instrument Error: /-(3qty of rod L/50) mu m. L Maximum measuring length

Series 139

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Enamelled Frame External Micrometers

Economy type with carbide tipped anvils. Accuracy: Flatness: 0.6mm for up to 300mm (12"), 1.0mm for up to 300-500mm (12-20"). Parallelism: 2L/100)mm (fraction rounded down). L maximum measuring length

103 Series

Ratchet Thimble

Spline Micrometers - Enamelled Frame

Small carbide tipped (3mm dia. x 10mm) anvils to fit around and into splined shafts, slots and keyways. Satin chrome finish thimble and sleeve, constant force ratchet and positive locking clamp. Accuracy: Parallelism: (2L/100) mu m (fraction rounded down). Flatness: 0.3 mu m. Instrument Error: /-3 mu m L maximum measuring length.

111 Series

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)