Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Interchangeable Anvil Type

One piece carbide tip spindle and six interchangeable anvils. Positive locking clamp and ratchet stop. Supplied with standards. Power Supply: Battery 1 off SR44 (PAN-904-5020K) supplied. Accuracy: Parallelism: (2L/100)mm (fraction rounded down). Flatness: within 0.6mm for up to 300mm within 1.0mm for up to 1000mm. Instrument Error: (4L/75)mm (fraction rounded up). Resolution: 0.001mm/0.00005"

Series 340

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Mechanical Digital Micrometers

With drop forged steel frame, micro-lapped Tungsten Carbide tipped measuring faces and constant force ratchet. Accuracy: 0-75mm /- 2 mu m, 75-150mm /- 3 mu m. Flatness: 0.6 mu m for up to 300mm. Parallelism: (2L/100) mu m (fraction rounded down). Counter to 0.01mm (.001"). Vernier scale graduated to 0.001mm (.0001").
L maximum measuring length

Series 193

Metric

Interchangeable Rod Type

These are lightweight, well balanced and rigid. Satin-chrome finish with hardened, ground and lapped measuring screw. Each micrometer of less than 300mm (12") is supplied with convenient handle to reach into deep holes. The set also includes spacing collar, a series of precision measuring rods and a dull chrome plated micrometer head. Spacing collars are designed for making up for the limited stroke of the micrometer head. Each rod marked with length. Easily reset - adjustment positive and permanent. Anvil is made from high grade steel, hardened, precision ground, micro-lapped and adjustable. Spanner wrench supplied with each micrometer. Accuracy: Instrument Error: /-(6L/50) mu m; L maximum measuring length

Series 141

Micrometer Setting Standards

For zero adjustment of outside micrometers. Accuracy: Flatness: within 0.3 mu m. Parallelism: within 2 mu m

167 Series (Micrometer NOT included)

Tubular Extension Sets - Pipe Type

Each set consists of inside micrometer head and a series of extension pipes of different length, which are hardened, ground, micro-lapped and heat insulated. Satin chrome finished head with positive locking clamp and carbide measuring faces. All sets include micrometer head. Accuracy: Micrometer head stroke: 25mm (1"). Graduation: 0.01mm (.001"). Instrument Error: /-(3qty of rod L/50) mu m. L Maximum measuring length

Series 139

Screw Thread Micrometer

Anvils

126 Series

Satin Chrome Finished Frame

Applications include measuring wall thickness of cylinders and tubes, shoulder to edge distance, rivet head height etc., accomplished using the: standard flat anvil, rod anvil, or optional V-anvil. Easily interchanged, with constant force ratchet and positive locking clamp. Quick and easy zero adjustment. Interchangeable anvils supplied: Flat anvil: (201216). Rod anvil: (201217) 3mm diameter for 0-25mm/0-1", (201379) 5mm diameter for 25-50mm/1-2". V-anvil: (201218) Available at extra cost. For measuring thickness of screw, shoulder length etc. Accuracy: Flatness: 2mm (Anvil Face), 0.6mm (Spindle Face). Parallelism: 3mm. Instrument Error: /-4mm.

Series 117

Tubular Extension Sets - Pipe Type

Each set consists of inside micrometer head and a series of extension pipes of different length, which are hardened, ground, micro-lapped and heat insulated. Satin chrome finished head with positive locking clamp and carbide measuring faces. All sets include micrometer head. Accuracy: Micrometer head stroke: 25mm (1"). Graduation: 0.01mm (.001"). Instrument Error: /-(3qty of rod L/50) mu m. L Maximum measuring length

Series 139