产品 / 切削工具
编号:CTL0602276R
●产品描述:
Brooke Cutting Tools Straight Tooth Side & Face Milling Cutters HSS
Designed with strip land and tooth form to give strength and more chip clearance. Special note is to be taken of the form at the back of the teeth which gives greater support to the cutting edge. The cutters are well adapted for a wide variety of production operations and are commonly used in pairs for straddle milling.
For all dimensional specifications please refer to our catalogue.
编号:DOR1854302F
●产品描述:
EX31 DIN 2184-1 Spiral Flute UNF Taps
Steam Tempered Finish
编号:SWT1853432B
●产品描述:
Swiss+Tech® Production Taps
These bright finish Swiss+Tech® blue ring spiral flute taps have a 'biteless flat' (BLF) for short blind holes.
Taper lead to
DIN form C (2xP to 3xP).
Tapping tolerance to 6H.
Helix angle 45°
Conform to DIN 371/376
For all technical and dimensional specifications please refer to our catalogue.
Blue Ring Spiral Flute BSP (British Standard Pipe) Production Tap Bright Finish HSS-EV
编号:SWT1630178A
●产品描述:
SwissTech 2 Flute Slot Drills Weldon Shank HSS-Co 8%
Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6. Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
For all dimensional specifications please refer to our catalogue.
Series 01 Short SDL-2WS TiALN Coated
Dimensions to DIN 327.
编号:DOR0265572H
●产品描述:
A520 - HSS ADX TiN Coated Stub Drills
Designed for use where high productivity and accuracy are required. Unique flute geometry. 130° point angle. TiN coating for increased tool life & performance. Manufactured to DIN1897.

编号:DOR1257838Q
●产品描述:
Dormer Solid Carbide Drills
The new Dormer MP-X range of multi-application carbide drills are cost effective, high performance drills that offer high productivity and supreme value for money. A wide range of materials can be machined using a minimum number of drills, to reduce stock-holding and associated costs.
MP-X Solid Carbide Drills
Dormer MP-X solid carbide drills deliver the following benefits and features:
Benefits
? Exceptional value with no compromise on quality.
? High productivity.
? Excellent hole quality.
? Availability.
? Reduced tooling costs.
Material
Micro-grain carbide for an excellent combination of hardness and toughness, resulting in high wear resistance and longer tool life.
Coating
Multi-layer titanium aluminum nitride (TiAlN) coating gives:
? Improved stability of cutting edges.
? Outstanding wear protection.
? High hardness properties.
? High toughness and oxidation stability
? Longer tool life and higher productivity.
Flute Geometry
Strong web design gives excellent crosssectional strength and facilitates chip evacuation.
Point Geometry
140 point angle with good centring capabilities and low thrust force design, suited to multiapplication drilling.
Multi-Application
Multi-application drilling across a wide range of materials, including:
? Carbon and alloy steels.
? Stainless steels.
? Cast iron.
? Aluminium.
? Magnesium alloys.
? Copper.
Suitable for Regrinding
The quality of design will allow consistently high levels of performance and tool life after the product is reconditioned, providing further cost reduction benefits.
编号:CTL0151382N
●产品描述:
Coventry Type Chaser Dies
Coventry high speed steel chaser dies are ideal for batch work or continuous production of threaded steel bar.
For all technical specifications please refer to our catalogue.
HSS Chaser Dies
BSP
编号:SWT1633966A
●产品描述:
SwissTech 2 Flute Ball Nosed Slot Drills Threaded Shank HSS-Co 8%
Centre cutting. Threaded shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6. Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
For all dimensional specifications please refer to our catalogue.
Series 39 Short SBL-2TS TiALN Coated
Dimensions to DIN 327.
编号:KEN0626080K
●产品描述:
Kennedy Endmills
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.
TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.
TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.
For all technical and dimensional specifications please refer to our catalogue.
*Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.
KC3 Endmill Long Series 3* Flute Throwaway Cutter Weldon Shank HSS-Co 5% TiCN Coated - Metric
编号:AME1555020S
●产品描述:
Allied Maxcut Series 0 and 0.5 Holders
Diameter range: 12.98 to 17.65mm.
For all dimensional specifications please refer to our catalogue.
Flanged Straight Shank