Kennametal Milling Inserts

Grade description: KC725M (ISO M15-M35, P15-P35, K15-35)
A Multi-layer PVD AlTiN coating with a tough 11.5% cobalt substrate designed primarily to be used in general and heavy machining. General purpose medium-speed grade for steels. Good resistance to thermal shock. Suitable for wet and dry machining applications. Speed range: 300 - 650 SFM on steel materials; 200 - 500 SFM on stainless steel materials.

Dodeka? Milling Inserts

For Kennametal Dodeka? milling bodies please refer to our catalogue.

Kennametal Indexable End Mill

The Kennametal range of Mill-1-10 are a range of 3D-Pocket Milling & Plunging Cutters.

Typical Applications:
Circular contour milling ID & OD
Full Slotting
Face and square shoulder milling
Profile milling
Circular face milling
Helical interpolation ramping into full material
Full slotting trochoidal

Features:
Inserts with integrated wiper facet.
Perfect ramping up to 9.5 and true 90.
Balancing cutting load to minimise vibrations and reduce spindle power.

Benefits:
One insert type to reduce inventory costs.
Higher feed rates. Spindle protection. Less spindle power consumption.
Perfect performance with circular ramping into full material - can replace drilling.
Increased productivity and soft cutting action in contouring and full slotting.
Reduced machining time in roughing operations.
Excellent performance and increased tool life in finishing applications.

Mill-1-10 Indexable End Mill

Kennametal Indexable End Mill

The Kennametal range of Mill-1-10 are a range of 3D-Pocket Milling & Plunging Cutters.

Typical Applications:
Circular contour milling ID & OD
Full Slotting
Face and square shoulder milling
Profile milling
Circular face milling
Helical interpolation ramping into full material
Full slotting trochoidal

Features:
Inserts with integrated wiper facet.
Perfect ramping up to 9.5 and true 90.
Balancing cutting load to minimise vibrations and reduce spindle power.

Benefits:
One insert type to reduce inventory costs.
Higher feed rates. Spindle protection. Less spindle power consumption.
Perfect performance with circular ramping into full material - can replace drilling.
Increased productivity and soft cutting action in contouring and full slotting.
Reduced machining time in roughing operations.
Excellent performance and increased tool life in finishing applications.

Mill-1-10 Indexable End Mill

Kennametal Indexable End Mill

The Kennametal range of Mill-1-10 are a range of 3D-Pocket Milling & Plunging Cutters.

Typical Applications:
Circular contour milling ID & OD
Full Slotting
Face and square shoulder milling
Profile milling
Circular face milling
Helical interpolation ramping into full material
Full slotting trochoidal

Features:
Inserts with integrated wiper facet.
Perfect ramping up to 9.5 and true 90.
Balancing cutting load to minimise vibrations and reduce spindle power.

Benefits:
One insert type to reduce inventory costs.
Higher feed rates. Spindle protection. Less spindle power consumption.
Perfect performance with circular ramping into full material - can replace drilling.
Increased productivity and soft cutting action in contouring and full slotting.
Reduced machining time in roughing operations.
Excellent performance and increased tool life in finishing applications.

Mill-1-10 Indexable End Mill

Kennametal Face Milling

Kennametal Dodeka™ inserts and cutters are for demanding face-milling applications in steel, stainless steel, cast iron, ductile iron, and other materials. They have been engineered to deliver higher cutting speeds and feed rates along with extended tool life. This has resulted in improved cutting performance and productivity across the most demanding of materials.

Compared to competitors' face-milling inserts, Dodeka inserts provide up to 30% more cutting performance at the same level of power consumption. At the same cutting conditions, Dodeka inserts supply up to 50% longer tool life.

With 12 cutting edges per insert, the unique Dodeka geometry generates low cutting forces, resulting in increased performance per edge. The inserts are also designed for ease of use, with a single screw for insert changing and indexing.

Dodeka™ Face Mills

Kennametal Dodeka™ Face Mills are specifically engineered to deliver consistent performance in demanding rough and finishing face milling applications!
Use less horsepower - and gain up to 30% in productivity.
Up to 50% longer tool life.
Easy-to-use - one screw enables fast, accurate indexing.
12 true cutting edges lower your cost per edge.
Run at higher speeds and feeds - with higher metal-removal rates.
Three new cutter sizes and three new geometries, including a new Wiper insert.
Engineered for applications requiring higher cutting speeds and feed rates with low cutting forces.
Ideally suited for roughing and finishing face milling applications in the General Engineering and
Automotive industries.
4.5mm depth-of-cut capability.
Available in diameters from 40 - 315mm.
Through-coolant standard.


For all technical specifications and inserts please refer to our catalogue.

Kennametal Face Milling

Kennametal Dodeka™ inserts and cutters are for demanding face-milling applications in steel, stainless steel, cast iron, ductile iron, and other materials. They have been engineered to deliver higher cutting speeds and feed rates along with extended tool life. This has resulted in improved cutting performance and productivity across the most demanding of materials.

Compared to competitors' face-milling inserts, Dodeka inserts provide up to 30% more cutting performance at the same level of power consumption. At the same cutting conditions, Dodeka inserts supply up to 50% longer tool life.

With 12 cutting edges per insert, the unique Dodeka geometry generates low cutting forces, resulting in increased performance per edge. The inserts are also designed for ease of use, with a single screw for insert changing and indexing.

Dodeka™ Face Mills

Kennametal Dodeka™ Face Mills are specifically engineered to deliver consistent performance in demanding rough and finishing face milling applications!
Use less horsepower - and gain up to 30% in productivity.
Up to 50% longer tool life.
Easy-to-use - one screw enables fast, accurate indexing.
12 true cutting edges lower your cost per edge.
Run at higher speeds and feeds - with higher metal-removal rates.
Three new cutter sizes and three new geometries, including a new Wiper insert.
Engineered for applications requiring higher cutting speeds and feed rates with low cutting forces.
Ideally suited for roughing and finishing face milling applications in the General Engineering and
Automotive industries.
4.5mm depth-of-cut capability.
Available in diameters from 40 - 315mm.
Through-coolant standard.


For all technical specifications and inserts please refer to our catalogue.

Kennametal Face Milling

Kennametal Dodeka™ inserts and cutters are for demanding face-milling applications in steel, stainless steel, cast iron, ductile iron, and other materials. They have been engineered to deliver higher cutting speeds and feed rates along with extended tool life. This has resulted in improved cutting performance and productivity across the most demanding of materials.

Compared to competitors' face-milling inserts, Dodeka inserts provide up to 30% more cutting performance at the same level of power consumption. At the same cutting conditions, Dodeka inserts supply up to 50% longer tool life.

With 12 cutting edges per insert, the unique Dodeka geometry generates low cutting forces, resulting in increased performance per edge. The inserts are also designed for ease of use, with a single screw for insert changing and indexing.

Dodeka™ Face Mills

Kennametal Dodeka™ Face Mills are specifically engineered to deliver consistent performance in demanding rough and finishing face milling applications!
Use less horsepower - and gain up to 30% in productivity.
Up to 50% longer tool life.
Easy-to-use - one screw enables fast, accurate indexing.
12 true cutting edges lower your cost per edge.
Run at higher speeds and feeds - with higher metal-removal rates.
Three new cutter sizes and three new geometries, including a new Wiper insert.
Engineered for applications requiring higher cutting speeds and feed rates with low cutting forces.
Ideally suited for roughing and finishing face milling applications in the General Engineering and
Automotive industries.
4.5mm depth-of-cut capability.
Available in diameters from 40 - 315mm.
Through-coolant standard.


For all technical specifications and inserts please refer to our catalogue.

Kennametal Milling Inserts

The Kennametal insert grade KC725M (ISO M15-M35, P15-P35, K15-35) is a multi-layer PVD coating with a tough 11.5% cobalt substrate. General purpose medium-speed grade for milling steel, stainless steel, and ductile cast iron. Good resistance to thermal shock. Suitable for wet and dry machining applications. Speed range: 300 - 650 SFM on steel materials; 200 - 500 SFM on stainless steel materials.

For all technical specifications please refer to our catalogue.

EDCT Indexable Milling Insert

Insert

Kennametal, the trusted innovator in metal cutting technology, introduced a new era in tooling. Harnessing advanced science and exceptional experience, they have gone more than a cut above - and created Beyond?, their next generation, ultra-performance tooling platform. This powerful collection delivers unheard of levels of productivity, efficiency, dependability, and profitability. And beyond.

Higher Productivity & Profitability - up to 30% Higher
l Achieve higher metal removal rate (speed, feed, and depth-of-cut).
2 Gain longer tool life.

Versatility
l Products can be applied across a wide range of applications.
2 Can be used in low- to high-speed applications.

Reliability
l Products deliver uniform wear for predictable tool life.
2 Achieve reduced depth-of-cut notching.
3 Virtually eliminate chip flow damage.

Complete Portfolio
l The Beyond product portfolio can be used in a complete range of steel, cast iron, and stainless steel ISO turning workpieces.

Kennametal Indexable Turning Inserts

Kennametal turning inserts are designed to increase productivity, improved tool selection and application to lower costs and improve quality!

CNMG 120408 KC850 Turning Insert

The Kennametal CNMG 120408 Turning Insert, the KC850 grade is equivalent to the following grades M25-M45, P25-P45. A tri-phase coating on an extra strong, cobalt-enriched substrate makes this Kennametal CNMG insert suitable for general purpose machining of many work piece materials. With the advent of higher machine tool spindle speeds, today it finds its best application in heavy cutting of low, medium, and high carbon steels, as well as medium hardness alloy and tool steels. Excellent thermal and mechanical shock resistance makes grade KC850 ideally suited for difficult applications with interruptions.

Insert Size: 120408
P Medium cutting chip breaker


For all technical specifications please refer to our catalogue.