Kennametal Indexable Turning Inserts

Grade Description: KC850 grade is equivalent to the following grades M25-M45, P25-P45. A tri-phase coating on an extra strong, cobalt-enriched substrate makes this Kennametal CNMG insert suitable for general purpose machining of many work piece materials. With the advent of higher machine tool spindle speeds, today it finds its best application in heavy cutting of low, medium, and high carbon steels, as well as medium hardness alloy and tool steels. Excellent thermal and mechanical shock resistance makes grade KC850 ideally suited for difficult applications with interruptions.

For all technical specifications and tool holders please refer to our catalogue.

Kennametal Indexable End Mill

The Kennametal range of Mill-1-10 are a range of 3D-Pocket Milling & Plunging Cutters.

Typical Applications:
Circular contour milling ID & OD
Full Slotting
Face and square shoulder milling
Profile milling
Circular face milling
Helical interpolation ramping into full material
Full slotting trochoidal

Features:
Inserts with integrated wiper facet.
Perfect ramping up to 9.5 and true 90.
Balancing cutting load to minimise vibrations and reduce spindle power.

Benefits:
One insert type to reduce inventory costs.
Higher feed rates. Spindle protection. Less spindle power consumption.
Perfect performance with circular ramping into full material - can replace drilling.
Increased productivity and soft cutting action in contouring and full slotting.
Reduced machining time in roughing operations.
Excellent performance and increased tool life in finishing applications.

Mill-1-10 Indexable End Mill

Kennametal Face Milling

Kennametal Dodeka™ inserts and cutters are for demanding face-milling applications in steel, stainless steel, cast iron, ductile iron, and other materials. They have been engineered to deliver higher cutting speeds and feed rates along with extended tool life. This has resulted in improved cutting performance and productivity across the most demanding of materials.

Compared to competitors' face-milling inserts, Dodeka inserts provide up to 30% more cutting performance at the same level of power consumption. At the same cutting conditions, Dodeka inserts supply up to 50% longer tool life.

With 12 cutting edges per insert, the unique Dodeka geometry generates low cutting forces, resulting in increased performance per edge. The inserts are also designed for ease of use, with a single screw for insert changing and indexing.

Dodeka™ Face Mills

Kennametal Dodeka™ Face Mills are specifically engineered to deliver consistent performance in demanding rough and finishing face milling applications!
Use less horsepower - and gain up to 30% in productivity.
Up to 50% longer tool life.
Easy-to-use - one screw enables fast, accurate indexing.
12 true cutting edges lower your cost per edge.
Run at higher speeds and feeds - with higher metal-removal rates.
Three new cutter sizes and three new geometries, including a new Wiper insert.
Engineered for applications requiring higher cutting speeds and feed rates with low cutting forces.
Ideally suited for roughing and finishing face milling applications in the General Engineering and
Automotive industries.
4.5mm depth-of-cut capability.
Available in diameters from 40 - 315mm.
Through-coolant standard.


For all technical specifications and inserts please refer to our catalogue.

Kennametal Milling Inserts

The Kennametal insert grade KC725M (ISO M15-M35, P15-P35, K15-35) is a multi-layer PVD coating with a tough 11.5% cobalt substrate. General purpose medium-speed grade for milling steel, stainless steel, and ductile cast iron. Good resistance to thermal shock. Suitable for wet and dry machining applications. Speed range: 300 - 650 SFM on steel materials; 200 - 500 SFM on stainless steel materials.

For all technical specifications please refer to our catalogue.

APKT 1604PDR KC725M Milling Insert

Kennametal Indexable End Mill

The Kennametal range of Mill-1-10 are a range of 3D-Pocket Milling & Plunging Cutters.

Typical Applications:
Circular contour milling ID & OD
Full Slotting
Face and square shoulder milling
Profile milling
Circular face milling
Helical interpolation ramping into full material
Full slotting trochoidal

Features:
Inserts with integrated wiper facet.
Perfect ramping up to 9.5 and true 90.
Balancing cutting load to minimise vibrations and reduce spindle power.

Benefits:
One insert type to reduce inventory costs.
Higher feed rates. Spindle protection. Less spindle power consumption.
Perfect performance with circular ramping into full material - can replace drilling.
Increased productivity and soft cutting action in contouring and full slotting.
Reduced machining time in roughing operations.
Excellent performance and increased tool life in finishing applications.

Mill-1-10 Indexable End Mill

Kennametal Indexable Turning Inserts

The Kennametal insert grade KC725M (ISO M15-M35, P15-P35, K15-35) is a multi-layer PVD coating with a tough 11.5% cobalt substrate. General purpose medium-speed grade for milling steel, stainless steel, and ductile cast iron. Good resistance to thermal shock. Suitable for wet and dry machining applications. Speed range: 300 - 650 SFM on steel materials; 200 - 500 SFM on stainless steel materials.

For all technical specifications please refer to our catalogue.

Kennametal KC9225 Indexable Turning Inserts

Kennametal KC9225 grade description:(M25 CVD coated). Cutting grade for universal applications in stainless steels, for smooth and lightly interrupted cuts. The micro polished surfaces resist build-up and microchipping. These properties have a positive effect when cutting low carbon steels.

DNMG

Kennametal KC8050 Indexable Turning Inserts

(P30, M30, K30 CVD coated). This grade, offers a well-balanced toughness and due to a special design of the coating, a good deformation and wear resistance. The polished edge geometry is the basis for its multi-range application, in particular in stainless and high temperature steels. For machining steel and cast materials with forging or casting skins.

CNMG

Kennametal Milling Inserts

The Kennametal insert grade KC725M (ISO M15-M35, P15-P35, K15-35) is a multi-layer PVD coating with a tough 11.5% cobalt substrate. General purpose medium-speed grade for milling steel, stainless steel, and ductile cast iron. Good resistance to thermal shock. Suitable for wet and dry machining applications. Speed range: 300 - 650 SFM on steel materials; 200 - 500 SFM on stainless steel materials.

For all technical specifications please refer to our catalogue.

APKT 1003PDR-IT KC725M Milling Insert

Kennametal Indexable Turning Inserts

Grade Description: KC850 grade is equivalent to the following grades M25-M45, P25-P45. A tri-phase coating on an extra strong, cobalt-enriched substrate makes this Kennametal CNMG insert suitable for general purpose machining of many work piece materials. With the advent of higher machine tool spindle speeds, today it finds its best application in heavy cutting of low, medium, and high carbon steels, as well as medium hardness alloy and tool steels. Excellent thermal and mechanical shock resistance makes grade KC850 ideally suited for difficult applications with interruptions.

For all technical specifications and tool holders please refer to our catalogue.