Walter Turning Inserts

This kit contains 10 Walter CNMG inserts and a Inexa-Seiki PCLNR Toolholder:

Walter Grade description: WAP20 (P20, K30) CVD coated (TICN AL203 TIN) primarily used for machining steel with good to medium interrupted cutting. Can also be used on cast iron.

For all technical specifications and tool holders please refer to our catalogue.

CNMG Inserts and PCLNR Toolholder Kit

Iscar Parting and Grooving Blades

Iscar's new, single-ended insert for parting with an improved
clamping method, tangentially clamped, single-ended parting system

TAG insert features:
Very rigid clamping in a tangentially oriented pocket.
Enables machining at very high feed rates and provides excellent straightness and surface finish.
Recommended for parting large diameter parts and for interrupted cuts.
Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications).
The combination of tangential clamping and free chip flow results in improved tool and insert lifetime.
Provides a solution to the problem of inserts being pulled out during retraction.

TGFH Part-Off Blade Set

The Iscar TGFH part-off blade set contains:
A double-ended tang-grip blade for parting & grooving.
10x Tag inserts grade IC808.

Grade Description: IC808 (ISO P15-P30, M20-M30, H10-H20, S15-S25)
A hard, fine grain substrate with excellent chipping resistance, combined with a new ?SUMO TEC? TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials.

Walter Turning Inserts

This kit contains 10 Walter CNMG inserts and a Inexa-Seiki PCLNR Toolholder:

Walter Grade description: WAP20 (P20, K30) CVD coated (TICN AL203 TIN) primarily used for machining steel with good to medium interrupted cutting. Can also be used on cast iron.

For all technical specifications and tool holders please refer to our catalogue.

CNMG Inserts and PCLNR Toolholder Kit

Iscar Parting and Grooving Blades

Iscar's new, single-ended insert for parting with an improved
clamping method, tangentially clamped, single-ended parting system

TAG insert features:
Very rigid clamping in a tangentially oriented pocket.
Enables machining at very high feed rates and provides excellent straightness and surface finish.
Recommended for parting large diameter parts and for interrupted cuts.
Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications).
The combination of tangential clamping and free chip flow results in improved tool and insert lifetime.
Provides a solution to the problem of inserts being pulled out during retraction.

TGFH Part-Off Blade Set

The Iscar TGFH part-off blade set contains:
A double-ended tang-grip blade for parting & grooving.
10x Tag inserts grade IC808.

Grade Description: IC808 (ISO P15-P30, M20-M30, H10-H20, S15-S25)
A hard, fine grain substrate with excellent chipping resistance, combined with a new ?SUMO TEC? TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials.

20 Piece Set

Offering superb value for money this 20 piece screwed shank milling cutter set contains an assortment of inch and metric milling cutters and slot drills.

Supplied in plastic carry case.

Milling Cutter Set - Screw Shank

20 Piece Set

Offering superb value for money this 20 piece Plain/Weldon shank milling cutter set contains an assortment of inch and metric milling cutters and slot drills.

Supplied in plastic carry case.

Milling Cutter Set - Plain/Weldon Shank

Sherwood HSS-Co Roughing Cutters

This Sherwood HSS-Co 5% Roughing cutter set contains: 8, 10 and 12mm diameter screwed shank, standard pitch roughing cutters.

Conform to: BS 122: Part 4: 1980

Supplied in plastic case.

4 Flute Roughing Cutters HSS-Co 3 Piece Set

Indexable Toolholder & Insert Sets

Tool supplied complete with 10 Carbide inserts, in a choice of P Grade for steels and general use, or K Grade for cast iron and non-ferrous applications. Inserts supplied will vary according to availability.

SCLC R

95° approach. Uses CC_T Inserts. For toolholder details see IND-106-4420K/-4480K/-4500K/-4510K.

Indexable Toolholder & Insert Sets

Tool supplied complete with 10 Carbide inserts, in a choice of P Grade for steels and general use, or K Grade for cast iron and non-ferrous applications. Inserts supplied will vary according to availability.

PDJN R/L

93° approach. Uses DN_A & DN_G Inserts. For toolholder details see IND-106-2380K/-2400K/-2420P/-2440P.

Indexable Toolholder & Insert Sets

Tool supplied complete with 10 Carbide inserts, in a choice of P Grade for steels and general use, or K Grade for cast iron and non-ferrous applications. Inserts supplied will vary according to availability.

PTGN R

90° approach. Uses TN_A & TN_G Inserts. For toolholder details see IND-106-3940K/-3980K.