Indexable Toolholder & Insert Sets

Tool supplied complete with 10 Carbide inserts, in a choice of P Grade for steels and general use, or K Grade for cast iron and non-ferrous applications. Inserts supplied will vary according to availability.

PCLN R/L

95° approach. Uses CN_A & CN_G Inserts. For toolholder details see IND-106-1980K/-2000K/-2040K/-2060K.

Iscar Parting and Grooving Blades

Iscar's new, single-ended insert for parting with an improved
clamping method, tangentially clamped, single-ended parting system

TAG insert features:
Very rigid clamping in a tangentially oriented pocket.
Enables machining at very high feed rates and provides excellent straightness and surface finish.
Recommended for parting large diameter parts and for interrupted cuts.
Offers a free, unobstructed chip flow, since there is no upper jaw as in the other clamping systems (very important in deep grooving and parting applications).
The combination of tangential clamping and free chip flow results in improved tool and insert lifetime.
Provides a solution to the problem of inserts being pulled out during retraction.

TGFH Part-Off Blade Set

The Iscar TGFH part-off blade set contains:
A double-ended tang-grip blade for parting & grooving.
10x Tag inserts grade IC808.

Grade Description: IC808 (ISO P15-P30, M20-M30, H10-H20, S15-S25)
A hard, fine grain substrate with excellent chipping resistance, combined with a new ?SUMO TEC? TiAlN PVD coating. Provides high wear resistance. Recommended for a very wide range of materials.

Walter Turning Inserts

This kit contains 10 Walter CNMG inserts and a Inexa-Seiki PCLNR Toolholder:

Walter Grade description: WAP20 (P20, K30) CVD coated (TICN AL203 TIN) primarily used for machining steel with good to medium interrupted cutting. Can also be used on cast iron.

For all technical specifications and tool holders please refer to our catalogue.

CNMG Inserts and PCLNR Toolholder Kit

Indexable Toolholder & Insert Sets

Tool supplied complete with 10 Carbide inserts, in a choice of P Grade for steels and general use, or K Grade for cast iron and non-ferrous applications. Inserts supplied will vary according to availability.

CSDP N

45° approach. Uses SP_R & SP_N Inserts. For toolholder details see IND-106-0420K/-0460K.

Indexable Boring Bar Sets

This toolholder is supplied complete with 10 Carbide inserts, either P Grade for steels and general use, or K Grade for cast iron and non-ferrous applications.

Type of inserts subject to availability.

SCLC R/L Boring Bar with 10 Inserts

95° approach. Uses CC_T Inserts. For boring bar details see IND-106-7380K/-7400K/-7480K/-7500K.

Indexable Toolholder & Insert Sets

Tool supplied complete with 10 Carbide inserts, in a choice of P Grade for steels and general use, or K Grade for cast iron and non-ferrous applications. Inserts supplied will vary according to availability.

PDJN R/L

93° approach. Uses DN_A & DN_G Inserts. For toolholder details see IND-106-2380K/-2400K/-2420P/-2440P.

20 Piece Set

Offering superb value for money this 20 piece screwed shank milling cutter set contains an assortment of inch and metric milling cutters and slot drills.

Supplied in plastic carry case.

Milling Cutter Set - Screw Shank

Milling Body and Insert Sets

Uses top clamping triangular inserts to produce a 90° shoulder at the edge of a milled face. When taking a number of cuts across a face the shoulder produced is without steps.
80mm diameter.
Insert size: TPKN 1603.

'Tri Square' 90 Face Mill c/w 1 set of TPKN Inserts

Indexable Toolholder & Insert Sets

Tool supplied complete with 10 Carbide inserts, in a choice of P Grade for steels and general use, or K Grade for cast iron and non-ferrous applications. Inserts supplied will vary according to availability.

MVJN R/L

93 approach. Uses VN_A & VN_G Inserts. For toolholder details see IND-106-1500P/-1520K

Indexable Toolholder & Insert Sets

Tool supplied complete with 10 Carbide inserts, in a choice of P Grade for steels and general use, or K Grade for cast iron and non-ferrous applications. Inserts supplied will vary according to availability.

SCLC R

95° approach. Uses CC_T Inserts. For toolholder details see IND-106-4420K/-4480K/-4500K/-4510K.