产品 / 切削工具
编号:IND1062450K
●产品描述:
Indexa-Seiki? Lever Lock External Toolholders
For further technical and dimensional specifications please refer to our catalogue.
PDJN - Left Hand
93 Approach for negative 55 rhombic inserts.
编号:GUH0661021A
●产品描述:
Guhring Machine Chucking Reamers Intermediate Diameter HSS-E
Available in diameters ranging from 2mm to 10mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 and DIN 2172 section 1.
Shank diameter equals cutting diameter - 0.025mm.
dia 2.00 - dia 2.65 / dia 2.66 - dia 10.00 H9.
Diameter Tolerances (to H7)
Up to 5.5mm: plus 0.004mm minus 0.000mm
Above 5.5mm: plus 0.005mm minus 0.000mm.
Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.
For all technical specifications please refer to our catalogue.
编号:SHR0652252C
●产品描述:
Sherwood Machine Reamers
Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head.
Conform to BS 122 : Part 2 and BS 328 Part 4.
For all technical and dimensional specifications please refer to our catalogue.
Machine Reamers Taper Shank HSS - Inch
编号:IND1442760K
●产品描述:
Indexa-Seiki ER - Collet Chucks
The Indexa-Seiki ER Collet chuck is manufactured as part of Europe's most popular collet system. The collapsing collet design can be used for a range of diameters and maintains concentricity for drilling and milling. Long reach options are also available to give access into deep recesses. Balanced to 12,000rpm. Max Tir 0.010mm. (BT BT-MAS 403)
QC Quick Change
编号:DOR0251920V
●产品描述:
Dormer HSCo Stub Drills
Excellent for drilling higher tensile, tougher materials
135° split point for improved precision and finish (over 1.5mm).
Manufactured to DIN1897.
HSCo Stub Drills - Series A117 - Metric
编号:GUH0261477M
●产品描述:
Guhring GV120 Heavy Duty Stub Drills HSS-Co
Manufactured to Type GV120 DIN1897.
Series 329

编号:STT0066005M
●产品描述:
M42 Bi-Metal Bandsaw Blades
Starrett Powerband Gladiator M42 is the ultimate competitor in bi-metal bandsaw blades, providing a universal solution with optimum efficiency in large production cutting operations. A high speed steel M42 cutting edge, incorporating a new tooth design with a positive rake angle and variable pitch, combine to give Powerband Gladiator? M42 the utmost in cutting performance and cost effectiveness.
Powerband Gladiator Welded Loops
Recommended applications for Starrett Powerband Gladiator M42 bandsaw blades:
- High production cutting, full range of steels from mild to stainless up to 45 HRC, nickel-based and non-ferrous alloys
Features and Benefits:
- New tooth design features triple-tempered
- M42 high speed steel with 8% cobalt
- Rockwell C67-69
- Up to 12 positive rake angle
- Fatigue resistant alloy steel backing strip
- High wear and heat resistance
- Variable pitch teeth reduce vibration for smooth, quick cutting
- Easy penetration, excellent chip clearance, reduced noise levels
- Improved surface finish
- Faster, straighter cuts
编号:SHR0243745R
●产品描述:
Sherwood Extra Length Drills Taper Shank HSS
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118, helix angle: normal, web thickness: standard, relief angle 8-20, tolerance of diameter: h8. Point angle to BS328 PTI 1986.
For all dimensional specifications please refer to our catalogue.
1 Morse Taper - Inch
Manufactured to Sherwood Standard
编号:KEN0202040K
●产品描述:
Kennedy Multi Flute Rose Pattern Straight Shank Countersinks
Manufactured from M35 HSS and used for the deburring and chamfering of most metals and plastics.
Straight shank, ground flute.
Manufactured to BS328:Part 5:1983.
For all dimensional specifications please refer to our catalogue.
90° Degrees
编号:SWT1631106A
●产品描述:
SwissTech 2 Flute Ball Nose Slot Drills Weldon Shank HSS-Co 8%
Centre cutting. Weldon shank to DIN 1835B. Cutting diameter to e8. Shank diameter to h6. Available in HSS-Co 8% Uncoated (for general production machining), HSS-Co 8% TiCN Coated (extends cutter life and improves work material surface finish) and HSS-Co 8% TiALN Coated (dissipates and resists heat, reduces surface friction coupled with high surface hardness).
For all dimensional specifications please refer to our catalogue.
Series 11 Short SBH-2WS HSS-Co 8%
Dimensions to DIN 327.