Indexa-Seiki ER - Single Angle Collets

Collet Dimensions:
Capacity 0.5-10.
(D)17mm x (L)27mm.

ER16

Swiss+Tech® HSS "Red Ring" Taps

Manufactured to DIN 371/376.

Spiral Point - HSS-Co Bright Finish ISO Metric Coarse

For through holes. Taper lead to DIN form B (5xP). Tapping Tolerance: Spiral Point to 6HX 2BX.

Swiss+Tech® HSS "Purple Ring" Taps

Manufactured to DIN 371/376.

Spiral Flute - HSS-PM Nitride Finish ISO Metric Coarse

For blind holes. Taper lead to DIN form B (4.5 x P). Tapping tolerance to 6HX 2BX. Helix angle 15°. Tapping depth 2.5 x D.

E040 Dormer ISO Spiral Point BSP(G) Taps

Bright Finish

SwissTech Heavy Duty Jobber Drills HSS-Co 8% Cobalt

The addition of up to 8% Cobalt allows higher speeds to be used without reducing the life of the tool, increasing productivity. 28 Helix and 135 Point. Manufactured to DIN338RN. Point to DIN1412C.

Series 1020 - Metric

Sherwood Taps

Sherwood HSS Taps are the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.

Manufactured with precision ground flutes for producing accurate thread forms, Sherwood Taps are available in all the popular thread forms and as straight Flute `Hand` Taps in 3 leads, Fluteless, Spiral Flute, or Spiral Point Machine Taps and also Long Series.

Sherwood Tap dimensions conform to ISO529 apart from NPT Forms which conform to ANSI 94.9. Straight Flute and Fluteless Taps are manufactured with a standard Bright Finish whereas the Machine Taps have an Oxidised Finish for best results dissipating the heat build-up associated with these applications.

Thread Forms are Class 2 medium fit tolerance.

For all technical and dimensional specifications please refer to our catalogue.

Spiral Flute Tap UNC (Unified Coarse) Ground Flute HSS

Spiral flute taps are used for machine tapping of blind holes as the have a spiral flute that channels the swarf back behind the tap and out of the hole along the flute.

Guhring Machine Chucking Reamers Intermediate Diameter HSS-E

Available in diameters ranging from 2mm to 10mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 and DIN 2172 section 1.

Shank diameter equals cutting diameter - 0.025mm.
dia 2.00 - dia 2.65 / dia 2.66 - dia 10.00 H9.

Diameter Tolerances (to H7)
Up to 5.5mm: plus 0.004mm minus 0.000mm
Above 5.5mm: plus 0.005mm minus 0.000mm.

Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.

For all technical specifications please refer to our catalogue.

Pinzbohr Boring Systems



Bohrstar 54 Boring System Kit

The Bohrstar 54 kit from Pinzbohr delivers the following features and benefits:
High strength and rigidity that is required for accuracy and repeatability.
A V-groove locking insert cartridge for improved rigidity.
All the compents of the kit are manufactured from nickel-chromium alloy.
Tapered Screw and Locking Pin Coupling
Tapered screws for most rigid coupling.
Dampens vibration under load.
Pin guarantees accurate head position.
Saves you money on tooling costs.
Saves time on the shop floor.
Performance guarantee.
The Bohrstar kit components are easy to install and require no special training or tools to use.

Boring range: 8 ~ 170mm.
Accuracy: to 0.0001
Bohrstar Kit Contents:
1x 54mm Bohrstar head with accu-set dial (38 ~ 59mm).
6x boring bars (8 ~ 43mm).
2x adaptor plates with cartridge insert (83 ~ 170mm).
Also includes counterweight, adjusting key, location sleeve, hexagon key, Torx key and fixing screws.

For all technical specifications please refer to our catalogue.

APKT

QK25C (ISO K15-K30) Coated. For milling cast irons.

1604

To suit: Indexa-Seiki Weldon End Mills. Indexa Seiki APT Shell Mills

Swiss+Burr™ Deburring Handles & Blades

Swiss+Burr™ hand deburring tools are a fast effective and efficient way of deburring holes, slots and edges. Swiss+Burr™ is a totally modular system of interchangeable handles, holders and blades designed to cover all applications. A choice of HSS or carbide blades, countersinks and scrapers are available to suit your specific application. Swiss+Burr™ blades are also interchangeable with commonly available brands including Kennedy, Noga, Ruko, Seco, Snap-Tap and Stellram.

D80 Chamfering Blade