T-Slot Clamping Kits

Designed to save set up time and solve most T-Slot clamping problems. All Components are manufactured from S45C (JIS)/CK45 (DIN) grade non alloy carbon steel. Heat treated to HRC 28-32 and have a manganese phosphate surface finish. Supplied in a robust plastic case.



Contents: Engineers Studs (4 off each): 75, 100, 125, 150, 175 & 200mm long. Step Blocks (4 off each): 28, 35 & 98mm high. Step Clamps (2 off each): 64, 100 & 150mm long. Nuts Extension 4 off Flanged 6 off T- slot 6 off.

Kennedy Precision Hand Files Industrial Quality

Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Available in tanged pattern 100mm (4") and 150mm (6") lengths. Manufactured to BS 498: 1990.

Square

Available in Cut 0, 2 and 4.

Sherwood Drills Taper Shank HSS

General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345.

For all dimensional specifications please refer to our catalogue.

Series T100 (MT2) - Metric

Sherwood Spiral Flute Chucking Reamers Straight Shank Cobalt HSS-E

The European version of machine reamers ideally suited for use on high performance CNC machines. They are also available, to special order, with a higher cobalt content or made from solid carbide for the machining of tougher more exotic materials. Manufactured to DIN 212 B.

For all dimensional specifications please refer to our catalogue.

Metric

Dormer Machine Taps

Dormer machine tap ranges have been designed for use with a high quality floating tool holder. For synchronous tapping on CNC machines with a rigid tapping cycle, Dormer SynchroFlex tool holders are recommended for a precisely defined minimum compensation in order to maximise machine performance. This is particularly important for larger sizes of spiral flute taps.

Available in spiral point for through holes and spiral flute for blind holes with 45 spiral angle. The three radii profile, with a constant rake angle all along the flute, is specially designed to give an optimum performance and chip evacuation in materials being threaded.
Surface Treatment
Special gold finish with bright flutes/thread, or steam tempering (blue) guarantee a smooth cutting action with less build up on the cutting edge.

Manufactured from HSS-XS1 premium quality vanadium powder steel and HSCo for superior toughness and edge strength, to give a high resistance to wear and long tool life.

All taps are available in Metric thread form initially. Thread forms Metric Fine, UNC, UNF and G will be stocked from September 2010.
Short Thread Length
The short thread length means low torque and better chip evacuation.
Thread Depth
Threading to depths of up to 2.5 x Diameter.

EX01 Series Spiral Flute Metric Machine Tap

Dormer Spiral Point Machine Taps for through holes.
With Blue finish.
Taper lead to DIN form C.
Tapping tolerance to 6H.
Max depth 2.5 x D.
Helix angle 45.

Guhring Stub Drills Carbide SL

Carbide drills deliver a quantum leap in high speed holemaking performance and tool life that manufacturers have been asking for. Carbide tooling provides faster cutting rates, longer tool life, better positional and dimensional accuracy and improved surface finish. Short cycle times and tighter tolerances translate into maximum machine utilizations, better part quality and optimum holemaking cost savings.

Series 5516

Kennedy Heavy Duty Drills for Stainless Steel HSS-Co 8%

Heavy-duty drill made of 8% cobalt material with excellent heat resistance. To drill steels with tensile strength up to 1,400 N/mm2, very hard bronze, stainless steels as well as heat and acid resistant steels. Point Angle: 135. Helix angle: Normal. Web thickness: Strengthened. Relief angle: Normal. Tolerance of diameter: h8. Tolerance of shank: f11. Manufacturing Standard: DIN338.

HSCo Heavy Duty Drill For Stainless Steel - Series XT34 - Metric

Swiss+Tech® Production Taps

Swiss+Tech® production spiral point taps are for threading through holes.
Manufactured from HSS-EV with an oxidised finish
Taper lead to DIN form B.
(3.5 x P to 5.5 x P).
Tapping tolerance to 6H.

Manufactured to DIN 371/376

For all technical and dimensional specifications please refer to our catalogue.

Blue Ring Spiral Flute UNF (Unified Fine) Production Tap HSS-EV

Allied Maxcut Series 1 and 1.5 Inserts

For all dimensional specifications please refer to our catalogue.

GEN2 T-A HSS Super Cobalt AM200 Coated

Mitsubishi Grooving Toolholders

Mitsubishi's GY grooving series offers the ultimate in rigidity and accuracy for stability when grooving. This easy to use modular blade system allows flexible tool management but maintains an overall strength comparable to a mono block type holder.

Mitsubishi Materials has developed an original and unique, new modular blade system. The TriForce system ensures the blade is securely fixed in 3 directions (side, front and top) giving high rigidity for stable grooving performance.

Outstanding compatibility, one toolholder can be used with several different blades, offering a versatile modular system and improved tool management.

GY Series Triforce Grooving Toolholder

These special promotion TriforceSuper Kits contain:

1 Toolholder
1 Blade - max 20mm depth
2 Inserts - 3mm wide Grade VP20RT (GM chipbreaker)

Grade description forVP20RT: Provides excellent combination of wear and shock resistance. Excellent in Nickel alloys and Stainless Steels