CNMG

QX535S (ISO M10-M30) CVD Coated. For roughing and finishing turning applications on a wide variety of Stainless Steels.

Allied Maxcut Accuport 432 Port Contour Cutter Kits

In order to better align with the metric port specification ISO-6149, AMEC has updated some features of our metric AccuPort 432 tools. Since the AccuPort 432 Port Contour Cutter is the only indexable tool in the industry that can produce the drilled hole and the port form in one step, dimensions were changed to produce the most capable forms possible. By setting dimensions to the nominal values, the resulting port form will be well within acceptable tolerance requirements. Dimensions that were updated related primarily to the ID ridge diameter, pilot length, seal angle diameter, and spotface diameter.

Patent Pending System
? One operation Port Hole Drilling System.
? No pre-drilling necessary.
? Excellent tool life.
? Lower tool costs.
? Through body coolant
? Eliminates regrinding and resetting
? Reduced cost per port

AccuPort 432 Port Form Inserts provide
? Absolute repeatability.
? Excellent surface finish.
? Coated Inserts for longer tool life and increased productivity.
? Now available in C3 Carbide with AM200 for increased performance in cast iron applications.

AccuPort 432 AccuThread 856 J1926 Ferrous Material Kits
Available to provide all the tooling necessary to create the finished port.
Includes AccuPort 432 Body, all Inserts, and an AccuThread 856 Threadmill.

Accuport 432 Port Contour Cutter KIts

Guhring Production Jobber Drills HSS-Co 5%

Solid Carbide Jobber drills are especially suitable for drilling cast steels, grey cast iron, chilled cast iron, austenitic manganese steels, bronzes, light metals and non-ferrous metals. Furthermore suitable for the economic machining of abrasive materials (AlSi-alloys), fibre-reinforced plastics and other Duroplastics liable to cause severe abrasion on cutting lips and lands.

Series 5517 - Metric

Kennedy® Milling Cutters Plain Shank Carbide Micrograin

3 Flute
Centre cutting as standard. Offer a combination of advantages achieved with two and four flutes giving profile and peripheral milling capability in addition to slotting and plunging. Manufactured to Works Standards.

For all dimensional and technical specifications please refer to our catalogue.

Regular Series 3 Flute Slot Drills - Inch

RDHX Inserts

Grade UMS
(P35) Uncoated Grade for rough machining of steel in unfavourable conditions. Large cutting depths and high feeds.



To suit Dijet Diemaster End & Face Mills

Indexa-Seiki ER - Single Angle Collets

Collet Dimensions:
Capacity 3.0-26.
(D)41mm x (L)46mm.

ER40

Starrett Bandsaw Blades

Made from carbon steel with a flexible back, Duratec™ SFB is ideal for economical cutting on easy-to-machine ferrous or non-ferrous metal and wood.
Features: Flexible carbon steel back. Wide range of widths, thickness and pitches.
Benefits: Blades can be run at higher band speeds than standard bi metal blades.
Economical general purpose cutting. Ideal for both contour & straight cutting.
Suitable for light vertical and horizontal machines.
Applications: Wood, plastics.
Non-ferrous foundry materials.
Low alloy and non-ferrous metals.
Furniture, composition board.

Sandvik Coromant CoroDrill 880 Drill Bodies

Stronger drill body with new surface treatment can withstand higher feeds. Wiper geometry for best surface finish. Optimized chip channels for accelerated chip evacuation. Easy identification due to laser marking with drill-, insert- and screw codes on the drill shank.

For all dimensional/technical specifications and for a full range of available Inserts, please refer to our catalogue.

Cylindrical shank - flat according to ISO 9766.

CoroDrill 880 Drill Bodies

Sherwood Long Series Drills HSS

General-purpose drills to drill steels with tensile strength up to 1,000N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, web thickness: normal, relief angle: 10-20, tolerance of diameter: h8, tolerance of f11. Manufactured to BS328:Part 1:1986, DIN340RN, ISO494. Bright finish; drills are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials.

For all dimensional specifications please refer to our catalogue.

Series L100 - Metric

Bright finish.

Sherwood 4, 6 & 8 Flute End Mills Threaded Shank HSS

Used for profile milling and producing open slots. Bright finish. Flute type : 30° Helix. Manufactured to BS 122 : Part 4 : 1980.

Long Series E304T - Inch

For all dimensional specifications please refer to our catalogue.