产品 / 切削工具
编号:GUH0618358H
●产品描述:
Guhring Slot Drills
Short rigid end mills to suit all general-purpose profiling applications, including alloyed steels, stainless steels and non-ferrous materials. Centre cutting with a unique Fire coating that is applied in Guhring's own coating plants using the PVD process. This all-around performance coating can achieve two to three times the performance of TiN, and considerably better than TiALN. It has excellent heat resistance as well as high toughness, therefore it is well-suited for interrupted cutting.
For all dimensional and technical specifications please refer to our catalogue.
Series 3663 2 Flute Slot Drills
编号:KEN0904890K
●产品描述:
Kennedy Toolbits
5% Cobalt Round.
编号:KEN1583150K
●产品描述:
Kennedy® Stub Length Drills Carbide
For drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic. Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6. Manufactured to DIN 6539.
Tolerances:
Cutting Dia. plus 0.000mm - 0.015mm.
Shank Dia. plus 0.000mm - 0.030mm.
Kennedy® Carbide Stub Length Drills - Metric
编号:ISC1153681K
●产品描述:
Iscar Turning Inserts
IC907 Grade description: (ISO P10-P30 M05-M20 S05-S20 H05-H15).
A tough submicron substrate, TiALN PVD coated grade. Suitable for turning heat resistant alloys, austenitic stainless steel and hard steel at low to medium cutting speeds.
VNMG
编号:SHR0243770T
●产品描述:
Sherwood Extra Length Drills Taper Shank HSS
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118, helix angle: normal, web thickness: standard, relief angle 8-20, tolerance of diameter: h8. Point angle to BS328 PTI 1986.
For all dimensional specifications please refer to our catalogue.
1 Morse Taper - Inch
Manufactured to Sherwood Standard
编号:DOR0252001R
●产品描述:
Dormer Stub Drills
The A120 HSS stub drill from Dormer has a standard helix right hand spiral. The rigidity of these Dormer stub drill bits allow them to be used in portable drills, turret and automatic lathes.
A120 Series Inch Stub Drill HSS
编号:IND1443452K
●产品描述:
Indexa-Seiki SL - Sidelock Adaptors
For Weldon shank cutters, adaptors and tapping chucks. Manufactured to stringent quality standards.
Standard Length
To BT-MAS 403
编号:IND1409243K
●产品描述:
Indexa-Seiki Standard Pull Studs
BT-MAS 403
编号:IND1064505K
●产品描述:
Indexa-Seiki? Screw-On External Toolholders
For further technical and dimensional specifications please refer to our catalogue.
SCLC - Left Hand
95 Approach for for 7 positive 80 rhombic inserts.
编号:GUH0660913A
●产品描述:
Guhring Machine Chucking Reamers Intermediate Diameter HSS-E
Available in diameters ranging from 2mm to 10mm in increments of 0.01mm. Made from HSS-E steel with a bright finish, left hand spiral flute. For all ferrous and non-ferrous metals and hard and soft plastics. For use on CNC machines, producing high quality reamed holes. Manufactured to DIN 212 and DIN 2172 section 1.
Shank diameter equals cutting diameter - 0.025mm.
dia 2.00 - dia 2.65 / dia 2.66 - dia 10.00 H9.
Diameter Tolerances (to H7)
Up to 5.5mm: plus 0.004mm minus 0.000mm
Above 5.5mm: plus 0.005mm minus 0.000mm.
Code numbers are determined by the nominal diameter. Delete the decimal point; create a four figure number by preceding the figures with a zero, if required. All codes finish with the letter A, i.e. 3.60 becomes 0360A.
For all technical specifications please refer to our catalogue.