产品 / 切削工具
编号：GRA1513804F
●产品描述：
Granlund HSS Size 1 Counterbores
Type NA. HSS. Tolerence P8.
Counterbores NA with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.
For further specifications please refer to our catalogue.
编号：GRA1514013A
●产品描述：
Granlund Size 1 Pilots
Type R Roller. c9.
When working ?dry? type R roller pilots must be lubricated. Pilots type RS must be combined with holders type AS.
For all technical specifications please refer to our catalogue.
编号：GRA1514089A
●产品描述：
Granlund Size 1 Pilots
Type RS Roller Tol. c9.
When working 'dry' type R roller pilots must be lubricated. Pilots type RS must be combined with holders type AS.
For all technical specifications please refer to our catalogue.
编号：GRA1513397A
●产品描述：
Granlund Carbide Size 1 Counterbores
Type HA. Carbide K10 micrograin. Tolerance P8.
For further specifications please refer to our catalogue.
编号：GRA1306454J
●产品描述：
Granlund TPMT PK40 Inserts
To suit WHV Counterbores and KV Countersinks. The Granlund inserts have special chip-breaking angle for optimum chip control. Carbide grade PK40.
编号：GRA1514284A
●产品描述：
Granlund Carbide Size 1 Counterbores
Type WHV. For Carbide inserts. Tolerance plus/minus 0.1.
The WHV Rotatip counterbore should always be combined with type R or RS roller pilots. The shank of the holder must not be smaller than MT3.
For further specifications please refer to our catalogue.
编号：GRA1513721A
●产品描述：
Granlund HSS Size 1 Counterbores
Type N. HSS. Tolerence P8.
Counterbores N with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.
For further specifications please refer to our catalogue.
编号：GRA1514087A
●产品描述：
Granlund Size 1 Pilots
Type RS Roller Tol. c9.
When working 'dry' type R roller pilots must be lubricated. Pilots type RS must be combined with holders type AS.
For all technical specifications please refer to our catalogue.
编号：GRA1513009F
●产品描述：
Granlund Size 1 Insert Drills
Type B HSS Tol. h8 flute 25mm.
When combining insert drills with countersinks, the drill must break through the work piece before secondary cutting commences and must not be used for blind holes.
For all technical specifications please refer to our catalogue.
编号：GRA1513815A
●产品描述：
Granlund HSS Size 1 Counterbores
Type NA. HSS. Tolerence P8.
Counterbores NA with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.
For further specifications please refer to our catalogue.