Indexa-Seiki VDI Toolholders

Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburised and hardened. Surface hardness of 58 - 60HRC. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.

ER Collet Chucks

E4 to DIN 6499/B

Indexa-Seiki Tapping Chucks - Tension & Compression Type

With axial compensation. Suitable for use on boring machines and machining centres. To MAS 403 BT Taper Shank.

For all technical specifications please refer to our catalogue.

MAS 403 BT Taper Shank

Indexa-Seiki? XP-45C ?Hi Shear? Milling Cutters

Super Positive 45 approach milling cutter, angle decreases cutting forces and allows a quick feed in a limited capacity machine. Torx screws allow for good chip evacuation. Plasma Ion coating offers longer tool life and greater hardness that is more resistant to wear. Through coolant as standard.

Indexa-Seiki VDI Toolholders

Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.

E2 Boring Bar Holders

Indexa-Seiki ER - Single Angle Collets

Collet Dimensions:
Capacity 3.0-26.
(D)41mm x (L)46mm.

ER40

XP-90C ?4 Square? Milling Cutters

The Indexa-Seiki XP-90C ?4 square? milling cutters are a positive 90 cutter with an exact angle of 90, square inserts allow deep passes and high feed rates per teeth. Torx style insert pocket with shim seats help protect the body in the event of an accident. The unique Plasma Ion coating offers longer tool life and greater hardness and increases wear resistance. Through tool coolant as standard, for optimum machining results.

For all technical specifications please refer to our catalogue

Indexa-Seiki VDI Toolholders

Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.

Axial

C2 Left Hand

Indexa-Seiki ER - Single Angle Collets

Collet Dimensions:
Capacity 3.0-26.
(D)41mm x (L)46mm.

ER40

Indexa-Seiki R8 Collets for Bridgeport Machines

Used directly in the machine spindle for general purpose milling and drilling operations, collets have dedicated bores for specific cutter shank sizes.



Available in bore sizes:
Metric: 3, 6, 8, 10, 11, 12, 14, 16 and 20mm.
Inch: 1/4, 3/8, 1/2, 5/8/ 3/4 and 7/8??.

Indexa-Seiki Standard Pull Studs

BT-MAS 403