产品 / 切削工具
编号：SHR0615186B
●产品描述：
Sherwood Multi Flute End Mills Threaded Shank HSS-Co
Used for profile milling and producing open slots. Bright finish. Flute Type: 30° Helix. Manufactured to BS 122 : Part 4 : 1980.
For all dimensional and technical specifications please refer to our catalogue.
Regular Series Type E411T - Metric
编号：SHR0652805F
●产品描述：
Sherwood Hand Reamers
Sherwood Taper Pin hand reamers are used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies.
Manufactured to BS 328 : Part 4 : 1990 and DIN 9A.
For all technical and dimensional specifications please refer to our catalogue.
Taper Pin Hand Reamers - Metric
编号：SHR0615420W
●产品描述：
Sherwood 4, 6 & 8 Flute End Mills Threaded Shank HSS
Used for profile milling and producing open slots. Bright finish. Flute type : 30° Helix. Manufactured to BS 122 : Part 4 : 1980.
Long Series E430T - Metric
For all dimensional specifications please refer to our catalogue.
编号：SHR0615727D
●产品描述：
Sherwood 2 Flute Long Series Slot Drills Threaded Shank HSS
Used for milling keyways and slots in one unit. Bright Finish. Flute Type: 30° Helix. Manufactured to BS 122: Part 4: 1980.
For all dimensional specifications please refer to our catalogue.
Inch
编号：SHR0614520X
●产品描述：
HSS Plain Shank Woodruff Cutters
12mm/1/2" shank
Produces closed slots for woodruff keys to DIN 6888. For milling structural, carburizing and heat treated steel up to 900N/mm2. Manufactured to BS 122 : Part 4 : 1980. Made to DIN 850.
Metric
编号：SHR0206300K
●产品描述：
3 Flute Straight Shank Countersinks
Sherwood countersinks are a chatter-free cutter that produce an excellent burr-free finish it is capable of deburring and countersinking in one stroke with no "back-off" of tool.
Countersinking a hole leaves an angled conical, chamfered recess on the finished job, for a tapered head bolt or screw to seat correctly into this angled form. Countersink bits can be used for deburring holes as well.
It will also countersink aluminium with no secondary bulge.
Ideal for special applications and exotic materials, a choice of hard coatings is available.
For all dimensional specifications please refer to our catalogue.
60 Degrees
编号：SHR0615833K
●产品描述：
Sherwood 2 Flute Long Series Slot Drills Threaded Shank HSS
Used for milling keyways and slots in one unit. Bright Finish. Flute Type: 30° Helix. Manufactured to BS 122: Part 4: 1980.
For all dimensional specifications please refer to our catalogue.
Metric
编号：SHR0615909K
●产品描述：
Sherwood 2 Flute Ball Nose Slot Drills Threaded Shank HSS
Used for diesinking, slot milling and profile milling. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.
For all dimensional and technical specifications please refer to our catalogue.
Short Series Type B210T - Inch
编号：SHR0615194S
●产品描述：
Sherwood Multi Flute End Mills Threaded Shank HSS-Co
Used for profile milling and producing open slots. Bright finish. Flute Type: 30° Helix. Manufactured to BS 122 : Part 4 : 1980.
For all dimensional and technical specifications please refer to our catalogue.
Regular Series Type E411T - Metric
编号：SHR0616601A
●产品描述：
Sherwood® Knuckle Form Ripper Cutters
The Sherwood K412T long series ripper cutters are suitable for applications where high metal removal rates are required.
Uncoated.
Bright finish.
Flute type: 25° spiral, roughing truncated.
Shank diameter to js14.
For all technical and dimensional specifications please refer to our catalogue.
Standard Series K412T - Inch
Inch Tolerances: diameter +/-0.005".
Metric Tolerances: diameter +/-0.127mm.