Sherwood Multi Flute End Mills Threaded Shank HSS-Co

Used for profile milling and producing open slots. Bright finish. Flute Type: 30° Helix. Manufactured to BS 122 : Part 4 : 1980.

For all dimensional and technical specifications please refer to our catalogue.

Regular Series Type E411T - Metric

Sherwood® Clearance Saws

The clearance on Type-B straight tooth Sherwood side chip HSS clearance saws is provided on the side of the teeth which have a strip side land and are well backed off. The teeth are designed to give maximum support to the cutting edge and provides sufficient swarf clearance.

For all technical and dimensional specifications please refer to our catalogue.

Clearance Saws Side Chip HSS Type-B

Sherwood 4, 6 & 8 Flute End Mills Threaded Shank HSS

Used for profile milling and producing open slots. Bright finish. Flute type : 30° Helix. Manufactured to BS 122 : Part 4 : 1980.

Long Series E304T - Inch

For all dimensional specifications please refer to our catalogue.

Sherwood Multi Flute End Mills Threaded Shank HSS

Used for profile milling and producing slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.

For all dimensional and technical specifications please refer to our catalogue.

Short Series E410T - Inch

Sherwood Multi Flute End Mills Threaded Shank HSS

Used for profile milling and producing slots. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.

For all dimensional and technical specifications please refer to our catalogue.

Short Series E410T - Inch

Sherwood 4, 6 & 8 Flute End Mills Threaded Shank HSS

Used for profile milling and producing open slots. Bright finish. Flute type : 30° Helix. Manufactured to BS 122 : Part 4 : 1980.

Long Series E304T - Inch

For all dimensional specifications please refer to our catalogue.

Sherwood 2 Flute Slot Drills Threaded Shank HSS-Co 5%

Centre cutting, used for profile milling, milling keyways and producing open slots. Surface treatment: bright finish. Flute type: 30° Helix. Manufactured to BS 122: Part 4: 1980.

Long Series - Metric

Sherwood 2 Flute Ball Nose Slot Drills Threaded Shank HSS

Used for diesinking, slot milling and profile milling. Bright finish. Flute type: 30° helix. Manufactured to BS 122 : Part 4 : 1980.

For all dimensional and technical specifications please refer to our catalogue.

Short Series Type B210T - Metric

Sherwood Machine Reamers

Used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. 45 beveled lead. Manufactured to BS 122 : Part 2 and BS 328 Part 4.



Imperial Limits of Tolerance (to H7)\t Diameter \t \tOver\tUp to and Including\t High \t Low \t -\t7/64"\t0.0003\t0.0001\t7/64"\t15/64"\t0.0004\t0.0002\t15/64"\t25/64"\t0.0005\t0.0002\t25/64"\t43/64"\t0.0006\t0.0003\t43/64"\t11/8"\t0.0007\t0.0004\t11/8"\t11/2"\t0.0008\t0.0004\t11/2"\t2"\t0.0010\t0.0005

HSS Plain Shank T-Slot Cutters

Used for machining T-slots on slide tables, fixtures etc.
To DIN 650. For milling structural, carburising and heat treated steel up to 900N/mm2. Sizes up to 16mm and 1/2” have six flutes and 18mm and 5/8” upwards have eight flutes.
Made to DIN 851.

Metric