产品 / 切削工具
编号：SHR0615309K
●产品描述：
Sherwood 4, 6 & 8 Flute End Mills Threaded Shank HSS
Used for profile milling and producing open slots. Bright finish. Flute type : 30° Helix. Manufactured to BS 122 : Part 4 : 1980.
Long Series E304T - Inch
For all dimensional specifications please refer to our catalogue.
编号：SHR1583640K
●产品描述：
Sherwood® Solid Carbide Drills
Sherwood Solid Carbide Stub Drills are suitable for drilling into steel, cast steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous materials and abrasive plastic.
Point angle: 118°, helix angle: 30°, tolerance of diameter: h7, tolerance of shank: h6.
Manufactured to Works Standard.
Solid Carbide Stub Drills
编号：SHR0615199Q
●产品描述：
Sherwood Multi Flute End Mills Threaded Shank HSS-Co
Used for profile milling and producing open slots. Bright finish. Flute Type: 30° Helix. Manufactured to BS 122 : Part 4 : 1980.
For all dimensional and technical specifications please refer to our catalogue.
Regular Series Type E411T - Metric
编号：SHR0252807T
●产品描述：
Sherwood Drills Taper Shank HSS
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345.
For all dimensional specifications please refer to our catalogue.
Series T100 (MT3) - Metric
编号：SHR0652140S
●产品描述：
Sherwood Straight Shank Parallel Hand Reamers
Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.
Spiral Flute Parallel Hand Reamers - Metric
For all dimensional specifications please refer to our catalogue.
编号：SHR1584560K
●产品描述：
Sherwood® Solid Carbide Drills
General-purpose drills for drilling a wide variety of metallic and non-metallic materials. Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters - 1 pce. Manufacturing Standard: BS 328, DIN 338.
J102 Solid Carbide Jobber Drills
编号：SHR0615848A
●产品描述：
Sherwood 2 Flute Long Series Slot Drills Threaded Shank HSS
Used for milling keyways and slots in one unit. Bright Finish. Flute Type: 30° Helix. Manufactured to BS 122: Part 4: 1980.
For all dimensional specifications please refer to our catalogue.
Metric
编号：SHR0252770D
●产品描述：
Sherwood Drills Taper Shank HSS
General-purpose drills to drill steels with a tensile strength up to 1.000 N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118°, helix angle: normal, relief angle: normal, tolerance of diameter: h8. Manufacturing Standard: DIN345.
For all dimensional specifications please refer to our catalogue.
Series T100 (MT2) - Metric
编号：SHR0724807G
●产品描述：
Sherwood® Slitting Saw Blades
Sherwood® HSS slitting saws are used for cutting metal, these small diameter saws are hollow ground to give the clearance necessary for deep cutting.
Sizes up to 1" diameter do not have key ways.
For all technical and dimensional specifications please refer to our catalogue.
Slitting Saw Small Diameter HSS
编号：SHR0251493E
●产品描述：
Sherwood Long Series Drills Steam Tempered HSS
General-purpose drills to drill steels with tensile strength up to 1,000N/mm2, cast steel, grey cast iron, malleable cast iron, nickel brass and graphite. Point angle: 118, helix angle: normal, web thickness: normal, relief angle: 10-20, tolerance of diameter: h8, tolerance of f11. Manufactured to BS328;Part 1:1986, DIN340RN, ISO494.
For all dimensional specifications please refer to our catalogue.
Series L100 - Metric