产品 / 切削工具
编号：SHR0725054F
●产品描述：
Sherwood® Slitting Saw Blades
Sherwood® HSS slitting saws are used for cutting metal, these small diameter saws are hollow ground to give the clearance necessary for deep cutting.
Sizes up to 1" diameter do not have key ways.
For all technical and dimensional specifications please refer to our catalogue.
Slitting Saw Small Diameter HSS
编号：SHR0243954E
●产品描述：
Sherwood Extra Length Drills Taper Shank HSS
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118, helix angle: normal, web thickness: standard, relief angle 8-20, tolerance of diameter: h8. Point angle to BS328 PTI 1986.
For all dimensional specifications please refer to our catalogue.
1 Morse Taper - Metric
编号：SHR0244030M
●产品描述：
Sherwood Extra Length Drills Taper Shank HSS
General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium, alloy and graphite. Point angle 118, helix angle: normal, web thickness: standard, relief angle 8-20, tolerance of diameter: h8. Point angle to BS328 PTI 1986.
For all dimensional specifications please refer to our catalogue.
3 Morse Taper - Metric
编号：SHR0202060K
●产品描述：
Sherwood Multi Flute Rose Pattern Straight Shank Countersinks
Inclusive angle 90.
Overall length: 52mm.
Available in cutting diameters of 3/8", 1/2" and 5/8".
For all dimensional specifications please refer to our catalogue.
90° Degrees
编号：SHR0725027T
●产品描述：
Sherwood® Slitting Saw Blades
Sherwood® HSS slitting saws are used for cutting metal, these small diameter saws are hollow ground to give the clearance necessary for deep cutting.
Sizes up to 1" diameter do not have key ways.
For all technical and dimensional specifications please refer to our catalogue.
Slitting Saw Small Diameter HSS
编号：SHR0861690K
●产品描述：
Sherwood Die Nuts
Sherwood ground thread die nuts are suitable for repairing damaged or crossed threads and clearing swarf from threads. When using a die nut (on an existing thread) it is not necessary to apply the same level of precise initial alignment required to form a new thread (i.e. with a die) as the nut will follow the existing threads. They are supplied as hexagon drive allowing them to be turned by a standard spanner or adjustable wrench without the need for a special stock.
Conform to: ISO 529
For all technical and dimensional specifications please refer to our catalogue.
Die Nuts Metric Coarse Ground Thread HSS
编号：SHR0615842V
●产品描述：
Sherwood 2 Flute Long Series Slot Drills Threaded Shank HSS
Used for milling keyways and slots in one unit. Bright Finish. Flute Type: 30° Helix. Manufactured to BS 122: Part 4: 1980.
For all dimensional specifications please refer to our catalogue.
Metric
编号：CTL0178701A
●产品描述：
Sherwood Ground Thread Chasers HSS
Used for the lathe turned production and repair of threads.
For all technical specifications please refer to our catalogue.
Hand
ISO Metric Form
编号：SHR0652764Q
●产品描述：
Sherwood Hand Reamers
Sherwood Taper Pin hand reamers are used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies.
Manufactured to BS 328 : Part 4 : 1990 and DIN 9A.
For all technical and dimensional specifications please refer to our catalogue.
Taper Pin Hand Reamers - Inch
编号：SHR0652147A
●产品描述：
Sherwood Straight Shank Parallel Hand Reamers
Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.
Spiral Flute Parallel Hand Reamers - Metric
For all dimensional specifications please refer to our catalogue.