Sherwood Drill Blanks HSS

Jobber length blank hardened and ground all over. Accurately ground without back taper. Diameter Tolerance: h8. Manufactured to DIN 338.

Series J400

Sherwood Die Nuts

Sherwood ground thread die nuts are suitable for repairing damaged or crossed threads and clearing swarf from threads. When using a die nut (on an existing thread) it is not necessary to apply the same level of precise initial alignment required to form a new thread (i.e. with a die) as the nut will follow the existing threads. They are supplied as hexagon drive allowing them to be turned by a standard spanner or adjustable wrench without the need for a special stock.

Conform to: ISO 529

For all technical and dimensional specifications please refer to our catalogue.

Die Nuts (British Standard Pipe Fine) Ground Thread HSS

Manufactured to: BS1127
Thread Form to: BS21

Sherwood Stub Centring Drills HSS

Stub centring drills are designed for sheet metal drilling and spot centring operations with a strong supporting web and a reduced chisel edge to help penetration. 135 split point.

For all dimensional specifications please refer to our catalogue.

Series S510 - 135 Degree Split Point

Sherwood Extra Length Drills Steam Tempered HSS

General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118, helix angle: normal, web thickness: standard, relief angle: 10-20, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328 : Part 1 : 1986.

For all dimensional specifications please refer to our catalogue.

Series E100 - Inch Sizes

Sherwood® Solid Carbide Drills

General-purpose drills for drilling a wide variety of metallic and non-metallic materials. Point angle: 118°. Tolerance of diameter: h7. Tolerance of shank: h6. Supply unit. All diameters - 1 pce. Manufacturing Standard: BS 328, DIN 338.

J102 Solid Carbide Jobber Drills

Sherwood Fine Pitch Ripper Cutters Weldon Shank HSS-EV

Multi flute ripper cutters. Manufactured from sintered HSS-EV extra vanadium steel. Knuckle form, h8 tolerance, standard length. Dimensions to DIN 844. Shank to DIN 1835D.

Regular Series

Sherwood Centre Drills HSS

Designed with spiral flutes and various lengths and forms to give high quality centre holes that suit most applications. 60 inclusive angle. Manufactured to BS328;Part 2:1986, DIN333A, ISO866, ISO2540, ISO2541.

For all dimensional specifications please refer to our catalogue.

Series C100

Sherwood Tap and Die Threading Sets

Sherwood metric coarse HSGT taps and dies supplied with tapping drills to suit, along with tap wrenches and die stocks. An industrial quality tool set for the discerning professional, designed to withstand the rigors and demands of a production environment. The two colour dual density tool control inner provides an instant visual indicator of missing tools, specified in aerospace manufacturing, Automotive industry and food processing.

M2-M16 Threading Set in Metal Case HSS - 37 Piece

Contents:
HSSGT Taper & Second Taps:
M2 x 0.40, M3 x 0.50, M4 x 0.70, M5 x 0.80, M6 x 1.00, M8 x 1.25, M10 x 1.50 & M12 x 1.75. Manufactured to ISO 529.
Bar Type Tap Wrenches: 1/16" - 1/4", 3/16" - 1/2".
Tapping Drills to suit:
1.6, 2.5, 3.3, 4.2, 5.0, 6.8, 8.5 & 10.2mm. Manufactured to BS 328/DIN 338N.
13/16" O/D Split Dies:
M2 x 0.40, M3 x 0.50, M4 x 0.70, M5 x 0.80 & M6 x 1.00.
1" O/D Split Dies:
M8 x 1.25 & M10 x 1.50. Manufactured to BS 1127.
Diestocks: 13/16" O/D & 1" O/D.
HSS Die Nuts: M12 x 1.75 & M16 x 2.00. Manufactured to BS 1127.

Supplied in a high quality fitted metal bench case with tool control inner.

Sherwood Extra Length Drills Steam Tempered HSS

General purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite. Point angle: 118, helix angle: normal, web thickness: standard, relief angle: 10-20, tolerance of diameter: h8, tolerance of shank: f11. Manufactured to BS 328 : Part 1 : 1986.

For all dimensional specifications please refer to our catalogue.

Series E100 - Inch Sizes

Sherwood® Centre Drills Solid Carbide

Used to produce 60° centres in components for subsequent manufacturing operations to be carried out. Tool life is extended and difficult materials may be drilled.
60° included angle.
118° drill point.
Manufactured to BS 328.
Tolerances:
Cutting diameter 0.0005
Shank diameter 0.0010
For all dimensional specifications please refer to our catalogue.