TCGT

K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

DNMA

QX505 (ISO K05-K15) Coated. Used for finishing, semi finishing and medium roughing of Cast Irons including Malleable and Nodular Irons, at high speed.

Yamaloy® Inserts

QMA (P20-P40/K20-K30) Coated. Sintered chipbreaker with a multi layer TiALN PVD coated sub-micrograin grade. Provides high quality threads for most materials including exotic alloys and stainless steels. Best performance is achieved at medium to high cutting speeds.

ISO Metric

External Right Hand

Yamaloy Threading Toolholders & Inserts

This DER 2020 K16 Metric type-B toolholder from Yamaloy is supplied with five 16ER ISO QMA grade Yamaloy threading inserts.

Grade Description: QMA (P20-P40, K20-K30) Sintered chipbreaker with a multi layer TiALN PVD coated sub-micrograin grade. Provides high quality threads for most materials including exotic alloys and stainless steels. Best performance is achieved at medium to high cutting speeds.

For the full list of the set contents and technical specifications please refer to our catalogue.

DER 2020 K16 Metric B-Type Toolholder & Inserts Threading Kit

Yamaloy threading kit contents:
1x 16ER B 1.00 ISO insert,
1x 16ER B 1.25 ISO insert,
1x 16ER B 1.50 ISO insert,
1x 16ER B 1.75 ISO insert,
1x 16ER B 2.00 ISO insert,
1x DER 2020 K16 toolholder,
1x T15 torx key.
Supplied in plastic tube.

CNMG

Excellent grade giving superior results on heat resistant super alloys, especially for the aerospace industry. TiAln based coating ensures high wear resistance on these demanding materials.

Aerospace Turning Inserts

QX8010 (P10/K10/M10/S30) Coated. An excellent
general purpose grade for medium roughing on steels, stainless and cast irons.
Chipbreaker Description: Nsa - Lighter depths of cut at low feeds.

CCMT

QX500 (ISO P10-P25) Cermet. For high speed finishing and light roughing. Will maintain a high class surface finish. Mainly used on steels and can be applied to finishing some Stainless steels and Cast Irons.

602

To suit: Indexa Seiki QMC QUAD Milling Cutter

Yamaloy® Inserts

QMA (P20-P40/K20-K30) Coated. Sintered chipbreaker with a multi layer TiALN PVD coated sub-micrograin grade. Provides high quality threads for most materials including exotic alloys and stainless steels. Best performance is achieved at medium to high cutting speeds.

ISO Metric

External Right Hand

TNMG Indexable Turning Inserts

QX520 (ISO P10-P35 M10-M30 K10-K30) Coated. An excellent general purpose grade for medium roughing on Steels, Stainless and Cast Irons.

DCGT Indexable Turning Inserts

K10 (ISO K10) Uncoated. Used in combination with a high rake geometry for machining Aluminiums, Plastics and other soft Non-Ferrous materials.

Yamaloy® Inserts

QMA (P20-P40/K20-K30) Coated. Sintered chipbreaker with a multi layer TiALN PVD coated sub-micrograin grade. Provides high quality threads for most materials including exotic alloys and stainless steels. Best performance is achieved at medium to high cutting speeds.

ISO Metric

Internal Right Hand