产品 / 轴承 & 滚轴
编号：CTT6887694C
●产品描述：
Conti-V Ultraflex
Narrow Section Wrapped V-Belts conform to DIN 7753 and BS 3790. Moderately oil-resistant. Resistant to temperatures from -55C to +70C. Electrically conductive (anti-static) to ISO 1813. Insensitive to dust. Suitable for tropical climates.
Belt Section 13/A (SPA/13)
编号：CTT6881152G
●产品描述：
Conti-V Standard Multiflex V-Belts
Classical section wrapped V-belts to DIN 2215. Moderately oil-resistant. Resistant to temperatures from -55C to +70C. Electrically conductive (anti-static) to ISO 813. Insensitive to dust. Suitable for tropical climates.
Belt Section 13/A (SPA/13)
Max Width (b1) 13mm, Height (h)8mm.
编号：OPB6882408J
●产品描述：
SK High Power Wedge Belts
To ISO 4184, BS 3790, DIN 7753 and
USA Standard RMA/MPTA.
The wrapped Optibelt SK wedge belt has been developed with mechanical engineering in mind.
It transmits substantially more power than the classical V-belt with comparable top width.
The Optibelt SK high performance wedge belt is preferred for use in heavy mechanical engineering with very high load requirements, which can be over 2000kW.
*Belts marked are part of the S = C PLUS range with an efficiency of approximately 97% and are suitable for use and require no service or adjustment during service life.
Belt Section 22/C (SPC/22)
编号：OPC6885090S
●产品描述：
Optibelt Timing Belts
Optibelt?s Alpha timing belts are manufactured from high grade polyurethane with steel reinforcing cords.
High precision profile for good repeatability.
Very low stretch.
Resistant to many oils and chemicals.
Wide and flexible range.
Alpha Polyurethane Timing Belts
T-Pitch Range - T2.5, T5, T10
编号：SNR6816611K
●产品描述：
Adapter Sleeves
Adaptor sleeves are commonly used for locating tapererd bored bearing and securing them to a shaft. They can be accurately positioned and dismounted. By using in conjuction with SNR feeler gauges accurate radial clearances will be achieved.
编号：RXN6910936P
●产品描述：
Elastomeric Couplings
Rexnord Viva Couplings feature a two-piece flex element design allows for simple replacement without disturbing hubs or moving and realigning connected equipment. Tough polyurethane material is bonded to a corrosion resistant coated shoe, eliminating the need for mechanical clamping hardware. Adhesive coated high strength carbon steel shoe resists corrosion. Easily aligned reversible hubs accommodate multiple shaft gaps. Hubs are available in rough bore, custom bore, or bushed designs. Optional hub materials are available. High grade cap screws are provided with self locking nylon thread patches. Stainless steel cap screws are also available. Torsionally soft polyurethane element cushions shock loads, accommodates unavoidable misalignment and is compatible with most environments. ?V? notch design directs stress concentration away from the bond area providing a uniform failure area for overload protection if required.
Viva Taper Bore Hubs
编号：CTT6888095D
●产品描述：
Conti-V Ultraflex
Narrow Section Wrapped V-Belts conform to DIN 7753 and BS 3790. Moderately oil-resistant. Resistant to temperatures from -55C to +70C. Electrically conductive (anti-static) to ISO 1813. Insensitive to dust. Suitable for tropical climates.
Belt Section 10/Z (SPZ/10)
编号：OPB6884092A
●产品描述：
SK High Power Wedge Belts
To ISO 4184, BS 3790, DIN 7753 and
USA Standard RMA/MPTA.
The wrapped Optibelt SK wedge belt has been developed with mechanical engineering in mind.
It transmits substantially more power than the classical V-belt with comparable top width.
The Optibelt SK high performance wedge belt is preferred for use in heavy mechanical engineering with very high load requirements, which can be over 2000kW.
*Belts marked are part of the S = C PLUS range with an efficiency of approximately 97% and are suitable for use and require no service or adjustment during service life.
Belt Section 13/A (SPA/13)
编号：OPB6951446A
●产品描述：
Taper Bore Bushes
Used to fit flywheels, pulleys and chain sprockets onto an electric motor shaft.
Taper Bore Bushes are easily assembled and are an ideal method of mating to a shaft without the need for machining.
To lock the shaft tighten up two grub screws,
to unlock it you remove the screws, inserting one in the third hole and wind in to lever off the hub from the shaft.
Material: EN-GJL 200/DIN EN 1561.
Metric Sizes
Keyways to DIN 6885 Part 1.
* Bores marked have shallow keyways.
编号：CTT6881054H
●产品描述：
Conti-V Standard Multiflex V-Belts
Classical section wrapped V-belts to DIN 2215. Moderately oil-resistant. Resistant to temperatures from -55C to +70C. Electrically conductive (anti-static) to ISO 813. Insensitive to dust. Suitable for tropical climates.
Belt Section 10/Z (SPZ/10)
Max Width (b1) 10mm, Height (h)6mm.