Bosch Sabre Saw Blades

All-purpose saw blade for wood and plastics.
Application: for coarse fast cuts in wood.
Blade: HCS, side set and milled.
Tooth pitch: 8.5.
Length: 228mm.
Product No. S1111K.

For Wood & Plastics (Pack 5)

Kennedy® Jigsaw Blades

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

Two Hole Type Suitable for old style Makita. HCS - Medium Duty (Pack 5)

Capacities: Wood - 50.0mm, Plastics 30.0mm. Tooth pitch: 4.0. Effective length: 65mm. Reversible for tight corners. Tapered & ground teeth.

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HCS - Medium Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T119B)
Application: wood 30mm, plastics 20mm.
Blade: HCS medium duty, wavy set tooth form.
Tooth pitch: 2.0mm.

Effective length: 48mm.

Pack of 5.

Bosch Jigsaw Blades

Application: Clean cutting. Hardwood, softwood, plywood, blockboard & plastic 25mm. Taper ground teeth. Effective length: 75mm. Pitch: 2.5.

Carbon Steel For Wood & Plastics (Pack 5)

Bosch Jigsaw Blades

Application: Aluminium, aluminium alloy, non-ferrous metal 3 - 15mm. Mild steel 3 - 6mm. Lead & tin 20mm. Plastic 30mm. Side set & milled teeth. Effective length: 75mm. Pitch: 3.0.

All Hard HSS For Metal (Pack 5)

Bosch Jigsaw Blades

Application: Splinter free cuts (down cutting teeth). Hardwood, softwood, plywood, laminated chipboard, plastic. Taper ground teeth. Effective length: 75mm. Pitch: 2.5.

Carbon Steel For Wood & Plastics (Pack 5)

Bosch Jigsaw Blades

Application: Fast clean cutting. Hardwood, softwood, blockboard, plywood, chipboard & plastic 60mm. Taper ground teeth. Effective length: 85mm. Pitch: 3.0.

Carbon Steel For Wood & Plastics (Pack 5)

Bosch Sabre Saw Blades

Bi-metal HSS all-purpose saw blades. Blade tooth set: milled, wavy set.
Application: thin sheet metal (1 - 3mm), fine, closed pipes/profiles (dia. 5 - 100mm).
Length: 150mm.
Tooth pitch: 1.0.
Product No. S918AF

For Metal (Pack 5)

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HSS - Heavy Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T318B)
Application: steel 3 - 6mm, aluminium 3 - 10mm.
Blade: HSS heavy duty, wavy set tooth form.
Tooth pitch: 2.0mm.

Effective length: 100mm.

Pack of 5.

Kennedy® "Contractor Packs" Jigsaw Blades

The most popular 'T' style blades bulk packed in 20's for economy. Supplied in telescopic 'pocket' cases that are ideal for the industrial user.

HSS - Heavy Duty (Pack 20)