Bosch Jigsaw Blades

Application: Mild steel, non-ferrous metal, aluminium, aluminium alloy 1.5 - 4mm. Acrylic glass 1.5 - 3mm. Wavy set & milled teeth. Effective length: 100mm. Pitch: 1.2.

All Hard HSS For Metal (Pack 5)

Bosch Jigsaw Blades

Application: Stainless steel sheet 1.5 - 4mm (reduce stroke rate without orbital action), mild steel 1.5 - 4mm. Tungsten carbide teeth. Effective length: 50mm. Pitch: 1.06.

Hard Metal Carbide Tipped For Special Applications (Pack 3)

Kennedy® "Contractor Packs" Jigsaw Blades

The most popular 'T' style blades bulk packed in 20's for economy. Supplied in telescopic 'pocket' cases that are ideal for the industrial user.

HCS - Medium Duty (Pack 20)

Bosch Jigsaw Blades

Application: Ceramics, glass, carbon sheet, fibreglass-reinforced plastics. Tungsten carbide coated, coarse cut. Effective length 59mm. 30 grit.

Hard Metal Carbide Tipped For Special Applications (Pack 3)

Kennedy® "Contractor Packs" Jigsaw Blades

The most popular 'T' style blades bulk packed in 20's for economy. Supplied in telescopic 'pocket' cases that are ideal for the industrial user.

HCS - Medium Duty (Pack 20)

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HCS - Medium Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T144D)
Application: wood 60mm, plastics 50mm.
Blade: HCS medium duty, tapered and ground.
Tooth pitch: 4.0mm.

Effective length: 75mm.

Pack of 5.

Bosch Sabre Saw Blades

Bi-metal all-purpose saw blade. Blade tooth set: milled, side set. Flexible flush cut, effortless fine cut, long life. Applications: wood with nails/metal 5 - 250mm, sheet metal, aluminium profiles 3 - 10mm, plastic profiles diameter 3 - 250mm.
Length: 300mm.
Progressive pitch: 1.8 - 2.6. (10 - 14TPI).
Product No. S1222VF.

For Wood, Metal & Plastics (Pack 5)

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HSS - Heavy Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T227D)
Application: steel 3 - 6mm, aluminium 3 - 15mm, plastics 30mm.
Blade: HSS heavy duty, side set teeth. For cutting curves.
Tooth pitch: 3.0mm.
Effective length: 75mm.

Kennedy® "Combi" Jigsaw Blade - Coarse Fine & Curve Cutting

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HCS - Medium Duty (Pack 5)

Double edged blade can be reversed in the machine to give the option of coarse cut or fine cut. Suitable for use on most woods, plastics, laminates etc. Reduced blade width also makes curve and profile cutting easier.
Supplied in cards of 5 blades.
Coarse Edge: 4mm Pitch x 70mm Effective Length
Fine Edge: 1.2mm Pitch x 40mm Effective Length

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HSS - Heavy Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T118G)
Application: steel 2mm, aluminium 2mm.
Blade: HSS heavy duty, wavy set tooth form.
Tooth pitch: 0.7mm.

Effective length: 50mm.

Pack of 5.