Bosch S3456XF Sabre Saw Blade - Multi-purpose (5 Pack)

Areas of application Wood with nails/metal, chipboards (5-150mm), sheet metal, aluminium profiles (3-18mm), plastics/Glass fibre reinforced plastics, profiles (dia. 5-150mm).



Total length: 200mm.
Thickness: 1.25mm.
Width: 19mm.
Tooth spacing, progr., min.: 2.1mm.
Tooth spacing, progr., max.: 4.3mm.
TPI progr., min.: 6 TPI.
TPI progr., max.: 12 TPI.
Tooth design side set, milled.

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HSS - Heavy Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T227D)
Application: steel 3 - 6mm, aluminium 3 - 15mm, plastics 30mm.
Blade: HSS heavy duty, side set teeth. For cutting curves.
Tooth pitch: 3.0mm.
Effective length: 75mm.

Bosch Jigsaw Blades

Application: For curved cutting for thin metal, non-ferrous metal, aluminium & sheet metal 1.5 - 3mm. Wavy set & milled teeth. Effective length: 50mm. Pitch: 1.2.

Flexible Back Bi-Metal For Wood & Plastics (Pack 5)

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HCS - Medium Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T119BO)
Application: wood 20mm, plastic 20mm. For cutting curves.
Blade: HCS medium duty, wavy set tooth form.
Tooth pitch: 2.5mm.

Effective length: 50mm.

Pack of 5.

Bosch Jigsaw Blades

Application: Softwood, chipboard, wood core plywood, fibre boards 5-50mm, doors & worktops <50mm. Side set & ground teeth. Effective length 74mm. Pitch: 4.0.

Carbon Steel For Wood & Plastics (Pack 5)

Bosch Sabre Saw Blades

Bi-metal, side set, milled teeth. For pallet repair, wood with nails/metal (100mm), metal plates, pipes, aluminium profiles (3 - 12mm).
Effective length: 100mm.
Pitch: 4.0.
Product No. S922HF.

For Wood, Metal & Plastics (Pack 5)

Bosch Jigsaw Blades

Application: Mild steel 3 - 6mm. Non-ferrous metal, aluminium, aluminium alloy 3 - 10mm. Wavy set & milled teeth. Effective length: 100mm. Pitch: 2.0.

All Hard HSS For Metal (Pack 5)

Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HCS - Medium Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T119A)
Application: wood 15mm, plastic 8mm.
Blade: HCS medium duty, wavy set tooth form.
Tooth pitch: 1.2mm.

Effective length: 48mm.
Pack of 5.

Kennedy® Jigsaw Blades

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

Two Hole Type Suitable for old style Makita. HCS - Medium Duty (Pack 5)

Capacities: Wood - 30.0mm, Plastics 20.0mm. Tooth pitch: 2.0. Effective length: 60mm. Wavy set teeth. Equivalent to Makita No.2.

Bosch Sabre Saw Blades

Bi-metal all-purpose saw blade. Blade tooth set: milled, side set. Flexible flush cut, effortless fine cut, long life. Applications: wood with nails/metal 5 - 250mm, sheet metal, aluminium profiles 3 - 10mm, plastic profiles diameter 3 - 250mm.
Length: 300mm.
Progressive pitch: 1.8 - 2.6. (10 - 14TPI).
Product No. S1222VF.

For Wood, Metal & Plastics (Pack 5)