Kennedy® "T" Type Shank Jigsaw Blades

High teeth per inch (TPI) blades are slower cutting and produce a better edge finish. Low teeth per inch blades are faster cutting but produce coarser cuts. Different materials will also give different edge finishes depending on the material and direction the grain. When cutting certain metals, lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw base plate reducing the gap around the blade and reduces the splinter area. Another technique is to score a guide line on the wood, this creates a pre-cut line that must then be followed accurately. Anothertechnique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made. 'T' Style or bayonet fitting as used by AEG, Atlas Copco, Bosch, Dewalt, Elu, Hitachi, Holz-Her, Kobe, Makita, Metabo.

HSS - Heavy Duty (Pack 5)

Jigsaw Blade (Equivalent to Bosch T318A)
Application: steel 4mm, aluminium 1.5 - 4mm.
Blade: HSS heavy duty, wavy set tooth form.
Tooth pitch: 1.2mm.

Effective length: 100mm.

Pack of 5.

Kennedy® Jigsaw Blades

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

Straight Shank Suitable for Fein, Wolf and Kress. Tungsten Carbide (Pack 1)

Capacities: Plastic - 20.0mm. 30 grit. For brick, slate and ceramics. Effective length: 55mm. Equivalent to Fein 89015.

Bosch Sabre Saw Blades

Bi-metal, side set, milled.
Applications: wood with nails/metal, chipboard (100mm), plastics/glass fibre reinforced plastics, solid (50mm), especially for curve cuts.
Length: 150mm.
Pitch: 5.0.
Product No. S711DF.

For Wood, Metal & Plastics (Pack 5)

Bosch Sabre Saw Blades

All-purpose saw blade for metal.
Application: flexible flush cut for non-ferrous metal, metal pipes and profiles 3 - 8mm.
Blade: bi-metal, side set and milled.
Tooth pitch: 1.8.
Length: 228mm.
Product No. S1122BF.

For Metal (Pack 5)

Kennedy® Jigsaw Blades

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

Straight Shank Suitable for Fein, Wolf and Kress. HCS - Medium Duty (Pack 5)

Capacities: Wood - 70mm, Plastic - 50mm. Tooth pitch: 4.0. Effective length: 85mm. Tapered & ground teeth.

Bosch Jigsaw Blades

Application: For curved cutting and right angled cutting. Hardwood, softwood, plywood, laminated chipboard & plastic 25mm. Pointed ground teeth. Effective length: 50mm. Pitch: 1.35.

Carbon Steel For Wood & Plastics (Pack 5)

Bosch Jigsaw Blades

Application: Fast & coarse cuts in fibreglass-reinforced plastics 6-60mm. Cement bonded chipboard, concrete, bricks 6-80mm. Tungsten carbide tipped side set teeth. Effective length: 100mm. Pitch: 4.3.

Hard Metal Carbide Tipped For Special Applications (Pack 3)

Bosch Jigsaw Blades

Application: Aluminium, non-ferrous metal up to 10mm. Aluminium alloy 3 - 10mm. Taper ground teeth. Effective length: 75mm. Pitch: 2.0.

All Hard HSS For Metal (Pack 5)

Kennedy® Jigsaw Blades

Manufactured from high quality steels to meet the demands of most industrial and DIY applications. Supplied display carded. High teeth per inch (TPI) blades will be slower cutting and produce a better edge finish. Low teeth per inch blades will be faster cutting but produce coarse edges on the workpiece. Different materials will also give different edge finishes depending on the make up of the material and direction of cut in relation to the direction of the grain. When cutting in some metals lubricant or grease may be required to reduce friction and dissipate heat. Various techniques can be employed to prevent splintering of cut edges on wood, especially laminated materials. These include the use of an anti-splinter guard. This is a plastic insert that locates in the jigsaw baseplate reducing the gap around the blade and reducing the splinter area. Another technique is to score a guide line on the wood creating a pre-cut line that must then be followed accurately. The last technique is to place adhesive tape over the proposed cut line, this holds the material in place whilst the cut is being made.

Straight Shank Suitable for Fein, Wolf and Kress. HCS - Medium Duty (Pack 5)

Capacities: Wood - 60mm, Plastic - 50mm. Tooth pitch: 4.0. Effective length: 75mm. For cutting curves. Side set teeth. Equivalent to Wolf 91482.

Bosch Jigsaw Blades

Application: Coarse cutting. Hardwood, softwood & plastic60mm. Side set & milled teeth. Effective length: 75mm. Pitch: 3.0.

Carbon Steel For Wood & Plastics (Pack 5)