PCL Airline Coupling Adaptors

Case hardened with passivated finish. For use with 'Standard' and 'Vertex' type couplings. Hard wearing passivated zinc finish for double protection against corrosion.

Female Threaded

1/4" BSPT.

Series AF

Part of SMC's new modular FRL system. Integral water separator. New super efficient 5um poly-element.

Replacement filter elements and mounting brackets are also available.

B - Bracket
C - Autodrain
D - Autodrain

Air Filters

Kennedy® Mini ISO Magnetic Cylinders

According to the European Standard CETOP RP52-P and DIN/ISO 6432. Fixed mechanical cushioning has been fitted as standard in order to reduce wear by high impact loads at very high speeds. Flanged construction. Operating temperature: 0°C - 80°C (with dry air -20°C). No Load Speed: 10 - 1000mm/sec. 1 - 10bar Pressure.

Series R3M - Double Acting

Electro Pneumatically Operated Valves

Type 358
Number of ports/positions: 5/2.
Port size: G1/8?.
Actuation types: 015 = single solenoid,
spring return.
E15 = single solenoid,
external servo-command.
Flow rate: 700 Nl/min.
Solenoid interface: mech. sol. 22 x 22.

Type 358

Series S6550

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Equal Elbow

PCL XF Series Airline Adaptors (EURO 130)

For use with XF Series Couplings. Designed to conform to ISO 4414:1998 and EN 983:1996 safety requirements covering the installation and use of pneumatic equipment.

Integral Tailpiece (non-threaded)

1/2" Bore.

Hand Operated Valves

Four port hand operated valves. Two position or three position closed exhaust centre. Panel mount version available.

Manually Operated Valves

Series: 3
Function: 5/2
Port: 1/8
Actuation: Toggle Switch

Manually Operated Valve - Toggle Switch

Push-fit System - Compressed Air

Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.
Working Temperature Range
Minimum Working Temperature -20C
Maximum Working Temperature +70C
Working Pressure
Temperature Pressure
+23C 10 Bar
+70C 7 Bar

Pipe Clips - Black

For securing pipe to walls.

5 Port Solenoid Valve

Compact five port rubber seal valves. Body ported or base mounted.