Rexroth Y-Plug Connectors

Y-plug connector with a push-in fitting.
Ambient temperature min/max: +0°C/+60°C.
Working pressure min/max: -0.95 bar/10 bar.
Materials:
Housing: polybutyleneterephthalate.
Seal: acrylonitrile butadiene rubber.
Tooth lock washer: stainless steel.
Release ring: polyoxymethylene.
Release ring holder: die cast zinc; brass, nickel-plated.

QR1 Series

Hydraulic Couplings

A range of one piece, no weep couplings covering a huge range of styles and terminations. Patented 'C' insert ensures an evenly distributed crimp. One coupling can be used with 1-wire and 2-wire hoses of various outside diameters. Reduced stockholding for an easier to manage inventory.

Key features:
Revolutionary one-piece design.
"Leak-free" concentric insert.
Optimum insertion force.
Patented "C" insert "Bite-the-wire" crimp.
No - skive.

Male DIN, 24 Cone, Heavy Series

Type MDH

PCL XF Series Airline Adaptors (EURO 130)

For use with XF Series Couplings. Designed to conform to ISO 4414:1998 and EN 983:1996 safety requirements covering the installation and use of pneumatic equipment.

Male Threaded

1/4" BSPT.

Kennedy® Coils for Solenoid Valves

DIN 43650/B. For use with solenoid valves. IP54. Nominal Size: 22mm. Terminal Pins: 2-Pole + earth.

Copper Compression Fittings

Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark, Prestex ?type A? compression fittings are suitable for mechanically joining copper or stainless steel tube by means of compressing a cone into a tube without the application of heat. The range is designed for use with copper tube to BS EN 1057: 1996 (formerly BS2871: part1 ), BS2871: part 2, or stainless steel tube to BS4127: 1994). Fittings are available in brass, all with brass cap nuts as standard.

Flanged Tank Connectors

For use on water tanks and cisterns.

Global Spiral Coupling

A range of one piece, no weep couplings covering a huge range of styles and terminations. Patented 'C' insert ensures an evenly distributed crimp. One coupling can be used with 1-wire and 2-wire hoses of various outside diameters. Reduced stockholding for an easier to manage inventory.

Key features:
Revolutionary one-piece design.
"Leak-free" concentric insert.
Optimum insertion force.
Patented "C" insert "Bite-the-wire" crimp.
No - skive.

Female BSP, O-Ring Swivel, 60° Cone. 45° Swept Elbow.

SMC Universal Male Elbows

KQ2V
Universal male elbows.

KQ2V04-01S: Tube O.D. 4mm. Thread: R1/8.
KQ2V06-01S: Tube O.D. 6mm. Thread: R1/8.
KQ2V06-02S: Tube O.D. 6mm. Thread: R1/4.
KQ2V08-01S: Tube O.D. 8mm. Thread: R1/8.
KQ2V08-01S: Tube O.D. 8mm. Thread: R1/8.
KQ2V08-02S: Tube O.D. 8mm. Thread: R1/4.
KQ2V10-02S: Tube O.D. 10mm. Thread: R1/4.
KQ2V08-03S: Tube O.D. 10mm. Thread: R3/8.
KQ2V08-04S: Tube O.D. 12mm. Thread: R1/4.



Colour: white.

Bosch Rexroth Pneumatic Fittings

Rexroth QR1 Series push in pneumatic fittings type are available for inch tubing/NPT threads and metric tubing/ISO-G (BSPP) threads. The user friendly oval release ring allow the push-in fittings to quickly release from the tubing much more easily than traditional round release rings. QR1 fittings come in standard and mini sizes, plus function fittings such as ball valves, check valves, flow control etc. They feature premium materials such as the stainless steel tube locking mechanism and polymer body and release ring.

QR1-RVT Series Elbow Pneumatic Fitting

Standard Metric M5-G Elbow push fit pneumatic fitting for compressed air hoses: 4 to 16mm diameter.

For further specification on this product please see the attached PDF under the additional information tab.

Filtermist Filters

An effective way to obtain depth filtration with high contaminant holding. Pure polypropylene, surfactant-free depth filter ensures low-pressure drops, with exceptional dirt-holding capabilities.
Dimensions: 60 x 255mm

Cotton Polypropylene Filter Cartridges

Mounting Accessories

Trunnion Brackets