Copely Nylon Tubing

NMF Eurlon Series
Eurolon industrial nylon tubing is extruded from polyamides 11 and 12 to precise dimensional tolerances, on machinery utilising the latest technical improvements in extrusion calibration. Eurolon industrial tubing has low moisture absorption when compared with other polyamides, ensuring consistent flexibility over a wide range of temperature and humidity conditions. Eurolon tubing is seamless in construction with a smooth high gloss inner and outer surface. It is light, approximately one ninth the weight of copper and flexible, facilitating ease of installation. It is ideally suited for applications such as fuel lines, oil lines, petrol tank breather sheaths, pneumatic controls, bleed lines and brake controls. Eurolon industrial nylon tubing conforms to S.M.M.T. standard NM7B, 1968 and C2C in dimensions specified in addition to SAEJ844 3A (unreinforced) and 3B (reinforced) types, (3B available by special order). Metric dimensions conform to BS5409 with respect to all technical details. Eurolon type 11 nylon in semi rigid grade meets the requirements of government regulations with regard to materials and articles in contact with food under UK Statutory instrument 1978 No.1927. Eurolon tubing is available for higher temperature applications, with heat resisting additives in both semi rigid and flexible grades, subject to minimum manufacturing quantities. Available in several colours: black, blue, natural, green, red and yellow.

Special features:
Resistant to a wide range of chemicals.
Silicone-free.
Excellent abrasion resistance.
Mirror smooth inner for improved flow.
Made from virgin polymer type 12.
Produced to exacting tolerances.
Supplied in 30 metre coils.

Gates Hydraulic Couplings

Female JIC Swivel. 37° Inverted Cone.
90° Swept Elbow Medium Drop (-4 to -20 drop dimensions meet ISO 12151-5).

Pressure Line Filter Elements

The selection of the perfect filtration solution contributes significantly to prevent damage caused by contamination whilst increasing productivity and reducing maintenance costs. The new filter element technology used in Betamicron4, has been specially developed to ensure sensitive components are protected, whilst the filter element has a significantly longer service life providing a high level of cleanliness and long-term stability for your hydraulic or lubrication systems.

Type R - Return Line Type

Copely PTFE Tubing

PTFE Series
Extruded from chemically inert compound, PTFE thin walled tubing is used in a wide range of applications, aerospace, medical and chemical. Service pressure should be 1/3rd of the burst pressure.
Pressure Temperature Relations
Temp C Pressure Fall
23 0%
50 50%
100 65%
150 70%
250 90%

Special features:
Excellent resistance to chemicals.
Excellent temperature range -60C to 250C.
Excellent coefficiency of friction.
FDA approved.
Excellent weathering properties.
Excellent electrical insulation properties.

Polytetrafluoroethylene Tubing

TU Series

Temperature range: -20C to +60C.
29 colours available.
Operating pressure: 0.6Pa.
Prices shown are for 20m coils - 100m coils also available.
Also available in nylon and flame resistant.

Series 2530

When involved in factory maintenance or plant installation it is often difficult to be certain which size of fitting will be required. The Camozzi pipe fitting range provides a cost effective solution to this problem. The full range includes straight, L - T shaped and cross piece male or female couplings, all of which are available in a large variety of thread sizes.

General Data:
Material: OT58 (nickel-plated).
Threads: GAS conical ISO 7 (BSPT). GAS cylindrical ISO 228 (BSP).
Pressure: 40 bar.
Fluid: compressed air or other low pressure fluids.
Temperature: -40C to 120C.



Male - Female Reducers

Series 32 Compact Magnetic Cylinders

Double Acting.
Standard ISO 21287.
Stainless steel rod.
Anodized aluminium extrusion.
Cast aluminium End Blocks.
Double Acting Stroke min-max Ø 20-25 : 510-500mm, Ø 20 : 10-500mm, Ø 25 : 10-500mm.
Bores: Ø 16, 20, 25.
Operating temperature: 0°C to +80°C (with dry air -20°C to +80°C).
Operating Pressure:
1 to 10 bar (Double-acting).
2 to 10 bar (Single-acting).
Speed: 10 to 1000mm/sec (no load).

Metal In-Line Type

AS series in line speed controllers minimise installation time and cost as they reduce the mounting height and enable compact machinery design. The number of needle rotations has been increased from 8 to 10 turns to permit easy control at low speeds. Applicable tube material nylon, soft nylon and polyurethane tubing.
Operating pressure: 1MPa max.

Gates Hydraulic Couplings

Female JIC Swivel. 37° Inverted Cone.
90° Swept Elbow Medium Drop (-4 to -20 drop dimensions meet ISO 12151-5).

Hydraulic Couplings

A range of one piece, no weep couplings covering a huge range of styles and terminations. Patented 'C' insert ensures an evenly distributed crimp. One coupling can be used with 1-wire and 2-wire hoses of various outside diameters. Reduced stockholding for an easier to manage inventory.

Key features:
Revolutionary one-piece design.
"Leak-free" concentric insert.
Optimum insertion force.
Patented "C" insert "Bite-the-wire" crimp.
No - skive.

Female DIN, O-Ring Swivel, 24 Cone-Heavy Series

FeType FDHORX