SMC AN203-02 Series Silencer

Over 25dB(A) noise reduction.
Space saving
Compact style.

AN203-02 Specification:
Port size: 1/4.
Effective area (mm2): 15.
Fluid: Compressed Air.
Max. operating pressure: 1.0MPa.
Noise reduction: 25dB(A).
Ambient and fluid temperature: 5 to 60C.
Weight: 3g.

Elbow Type

Three functions from a single component to minimises installation time and cost. Accepts nylon and polyurethane tubing. Integral one-touch fitting. 4mm - 12mm.

Kennedy® Magnetic Sensor with LED

T-slot Reed Switch for use with barrel cylinders made to ISO 6431, ISO 15552 and VDMA 24562
Protection IP67: EN60529.
Cable length: 3m.
Voltage 5-240V AC/DC.
Current: 100mA max.
Max. Power 6VA.

Gates Hydraulic Couplings

Male BSP Parallel, 60° Inverted Cone.

Camozzi Male Stud Tees

2080
Series 2000 pipe fittings BSPT adaptor male stud tee.
Available in G1/8, G1/4, G3/8 and G1/2 threads.

PCL? PF Airline Adaptor

This PF range of couplings and adaptors has been designed to offer a competitive alternative to the genuine Schrader range of couplings and adaptors.
Nominal bore: 5.0mm.
Flow rate 6bar: 2200 l/min 0.5bar p.d.
Maximum working pressure: 35 bar (508lbf/in).
Temperature range: -40C to 100C.



1/4" BSPT.

SMC Pneumatic Fittings



MGP Series Compact Guide Cylinder

Possible piping from two directions. Two types of guide rod bearing to accommodate various applications (Slide bearing,
Ball bearing). Auto switches can be mounted.

Compact guide cylinder
Bearing Type: Slide bearing
Bore size: 12mm
Cylinder stroke: 10mm

For further specification on this product please see the attached PDF under the additional information tab.

Copely Polyurethane Tube

CPU Series
Codeflex polyurethane tube is suitable for a wide range of applications demanding a flexible and cut resistant tube in applications such as pneumatic control systems and chemical transfer tubing. Codeflex polyurethane is well suited to applications demanding maximum kink resistance, minimum kink memory. It is suitable for fitting into confined spaces where conventional tubes lacking the above factors would increase fitting time in addition to flow restriction.

Applications:
Pneumatic control systems.
Fuel and lubrication lines.
Chemical transfer tubing.
Special features:
Exceptional abrasion resistance.
Resistance to a wide range of chemicals.
High flexibility.
Silicone-free.
Working pressures:
Nominal working pressure calculated at 23C with a 4.1 safety factor.
Temperatures: -50C/55C (short term use at 85C).
Special note:
The CPU series has been designed and developed to meet the exacting standards of the push fit type of coupling.
Supplied as 30 metre coils.

PCL ?Standard? Airline Couplings

The 'Industry Standard' coupling. For use with air tools, garage, industrial air line supplies and test panels. Free air flow rate at 7bar/100PSI: 35 to 42 cfm (990 to 1130ltr/min). Zinc plated all steel construction, finished in hard wearing passivate. Stainless steel springs and balls. Positive single locking action prevents accidental dislocation. For fixed applications - for couplings for trailing hoses see 'Vertex' type below.

Male Threaded

1/2" BSPT.

Pressure Line Filter Elements

The selection of the perfect filtration solution contributes significantly to prevent damage caused by contamination whilst increasing productivity and reducing maintenance costs. The new filter element technology used in Betamicron4, has been specially developed to ensure sensitive components are protected, whilst the filter element has a significantly longer service life providing a high level of cleanliness and long-term stability for your hydraulic or lubrication systems.

Type D/DN - Pressure Line Type