SMC One-Touch Mini Hex Socket Head Male Adaptor

KJS
Mini hexagon socket head male connector.
KJS04-M3: Tube O.D. 4mm. Thread T: M3 x 0.5.
KJS04-M5: Tube O.D. 4mm. Thread T: M5 x 0.8.
KJS06-M5: Tube O.D. 6mm. Thread T: M5 x 0.8.

Kennedy® Pneumatic Fittings

Quick and simple tube insertion, compact lightweight design, advanced well proven tube retaining system, re-usable thread seal. Main body manufactured from Nickel plated brass, acetal resin, PBT with a stainless stell retaining ring, nitrile tube seal and acetal resin tube release collar. Pressure range: - 0.9 bar min to 10 bar max. Temp range: -20°C min to +70°C max. Tube suitability: nylon, polyurethane.

Connector to Male Taper

Bosch Rexroth Pneumatic Fittings

Rexroth QR1 Series push in pneumatic fittings type are available for inch tubing/NPT threads and metric tubing/ISO-G (BSPP) threads. The user friendly oval release ring allow the push-in fittings to quickly release from the tubing much more easily than traditional round release rings. QR1 fittings come in standard and mini sizes, plus function fittings such as ball valves, check valves, flow control etc. They feature premium materials such as the stainless steel tube locking mechanism and polymer body and release ring.

QR1 Series Blanking Screw Pneumatic Fitting

Blanking screw with O-ring M7-G1/2 FPT-S-RBI pneumatic fitting.
Working pressure 0 bar/16 bar at -20C/ +80C.
Materials:
Screw: Brass
Housing: Brass, nickel plated
Seal: Acrylonitrile Butadiene Rubber
Thread: Brass, nickel plated

For further specification on this product please see the attached PDF under the additional information tab.

Series S6550

Micro Super-Rapid fittings allow fast connection and disconnection of plastic tube, it can be repeated several times and can be performed using one hand and without the use of tools. The sealing ring (O-Ring) can be easily replaced if it is damaged or should the rubber compound from which it is made wear with time. This advantage derives from the simple execution of the internal collet, which can be extracted allowing the replacement of the O-Ring.

General data:
Material body and collet: brass OT nickel-plated O-Ring NBR, seal PTFE, NBR, PA
Threads: M3, M5, M7, G1/8, G1/4.
Pressure: min. -0,8 to max. 16 bar (see tubing).
Tube to connect rilsan: PA 6 - 11 - 12 , polyethylene, polyurethane.
Diameters: 3, 4, 6, 8 and 10mm.
Fluid: compressed air (for other types of fluid, contact our engineers).
Temperature: -10C to 60C (see data for tubing used).



Equal Elbow

In-Line Type

AS series in line speed controllers minimise installation time and cost as they reduce the mounting height and enable compact machinery design. The number of needle rotations has been increased from 8 to 10 turns to permit easy control at low speeds. Applicable tube material nylon, soft nylon and polyurethane tubing.
Operating pressure: 1MPa max.

Bosch Rexroth Pneumatic Fittings

Series TC08 and TC15 manifolds or single in-line valves provide a highly reliable, high flow, cost effective solution for a wide variety of applications. The use of polymer technology results in a lightweight and the compact design that permits use in tight spaces. The easy-to assemble manifold system has a reduced height because it does not require sub bases, and quick valve changes make it maintenance friendly. Available as inch and metric porting options and widening customer choice.

TC08 Series Electro Pneumatically Operated Valves

5/2 way valve, series TC08
Qn=800 l/min, pipe connection with compressed air connection output: G 1/8.
Electrical connection: Plug ISO15217, form C.
Manual override: without detent.
Single solenoid, double solenoid.

For further specification on this product please see the attached PDF under the additional information tab.

Rexroth Straight Plug Reducing Connectors

QR1-RSR Series
Push-in fitting straight plug reducing connector.
Available in sizes:
6mm-4mm.
8mm-4mm.
10mm-8mm.
12mm-10mm.

Ambient temperature min/max: +0°C/+60°C.
Working pressure min./max: -0.95 bar/10 bar.
Materials:
Housing: polybutyleneterephthalate.
Seal: acrylonitrile butadiene rubber.
Tooth lock washer: stainless steel.
Release ring: polyoxymethylene.
Release ring holder: die cast zinc; brass, nickel-plated.

Manually Operated Slide Valve

Aluminium body, stainless steel spool, NBR seals.
Ports: G1/8 – G3/4
Fluid: Filtered air, without lubrication. If lubricated air is used, it is recommended to use ISO VG32 oil. Once applied the lubrication should never be interrupted.



Type: Female/Female
Connection: 1/8

Push-fit System - Compressed Air

Range of push-in fittings and pipe provide the ideal connection from compressor to air-line service components through to complete ring main and take off points. A compressed air system can be installed quickly and easily, reducing the need for specialist staff providing reduced production down time. All the connections can be made with a simple push-in action, no need to prepare threaded pipe or solvent. The system will be ready for use immediately and complex systems much more rapidly than traditional methods. Because of the ease of use, this system can be disconnected, altered and extended. Suitable for use with a wide range of plastic and soft metal pipes including UPVC, ABS, polyethylene, nylon, mild steel and copper. It is recommended that all installations are checked prior to use to determine that a seal has been made. The maximum torque figures quoted are dependent on the mating thread conforming to the relevant British or International thread standard.
Working Temperature Range
Minimum Working Temperature -20C
Maximum Working Temperature +70C
Working Pressure
Temperature Pressure
+23C 10 Bar
+70C 7 Bar

Straight Adaptors

Connects a threaded pipe to a plain pipe end to end.

Hydraulic Couplings

A range of one piece, no weep couplings covering a huge range of styles and terminations. Patented 'C' insert ensures an evenly distributed crimp. One coupling can be used with 1-wire and 2-wire hoses of various outside diameters. Reduced stockholding for an easier to manage inventory.

Key features:
Revolutionary one-piece design.
"Leak-free" concentric insert.
Optimum insertion force.
Patented "C" insert "Bite-the-wire" crimp.
No - skive.

Male DIN, 24 Cone, Heavy Series

Type MDH