Kennedy 1 Tonne Scissor Jack

Made from heavy duty steel. Designed to safely raise vehicles. Easy to use and compact for easy storage. Rubber saddle provides a positive grip and prevents damage to jacking points. Lifting range: 88 - 383mm (3 7/16" x 15 1/16"). 1 Tonne (1000kg) safe working load. Wide base plate for extra stability. Base plate size: 150 x 90mm. Spindle thread 12.5 x 2.5mm.

1 Tonne Scissor Jack

Kennedy Spring Compressor Sets

Hardened steel screws and cast steel claws.
Each leg has one free moving claw & one threaded claw. 1/2" square drive or 24mm hexagon drive can be used with air tools or spanners. Fitted with safety hooks to prevent accidental release.
Suitable for use on cars & commercial vehicles and allows safe compression of heavier springs.
Maximum jaw opening: 240mm

3 Legged

Nut Splitters

Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts etc.

Sykes-Pickavant Hydraulic Ball Joint Separator

Manufactured from hardened steel with tough epoxy coating. Tapered fork for easy access. Hydraulic ram allows up to 8 tonnes of force to be applied. Jaw opening: 70mm. Throat width: 36mm. Throat depth: 50mm.

Body Repair Kit

Used for clamping, pulling, bending, straightening, spreading and lifting operations. Snaps together quickly. Heavy duty hand pump has automatic overload feature. Tough, blow moulded case.
Strong flexible hose with spring guards at both ends.
Hydraulic hand pump, ram and spreader.

Spares

Spreader Ram Repair Kit

3 Piece Oxygen/Lamda Sensor Socket Set

3 piece universal set. Essential for servicing today's computer-controlled vehicle systems. Easily removes exhaust gas oxygen sensors (known as "EGO", "O2" or "Lambda" sensors), vacuum switches and pressure switches. Also suitable for diesel injectors found on Mitsubishi, Nissan, Opel, Vauxhall and VW vehicles. Made from heat treated cast steel.

Set contains:
22mm (7/8") hex, 1/2" square drive socket with 7.5mm side slot for sensor wire clearance. Socket has 22mm hex for use with a spanner. Overall length 80mm.

22mm (7/8") hex, crow's foot style wrench, 1/2" square drive (double square for easy access). With full length 11mm slot for total clearance of switch/sensor wire

22mm (7/8") hex, crow's foot style wrench, 3/8" square drive. With full length 8.6mm slot for total clearance of switch/sensor wire.

Seam Splitter Set - 3Pce

Ideal for separating spot-welded panels during repairs.
Stainless steel coated Chrome Vanadium with through tangs shafts allow use with hammers.
Dual material soft grip handles for comfort and control.
Includes 90, curved and straight seam splitters.
Cushioned handle absorbs any shock from hammer blows.
Made from super tough alloy steel.
Pack size: 400(H) x 175(W)mm
Gross Weight: 0.94kg

90 Seam Splitter
* Easily separates hard-to-reach spot welding or bonding panels. Best used for quarter panels, rockers and any other pinch welds.
* Sharpened on three sides, the sharp end allows for penetration between the panels and the edges allow for side impact to lever the panels.
* Blade width: 25mm
* Blade Depth: 65mm
* Overall length: 240mm

Curved Seam Splitter
* For quarter panels, rockers and any other pinch weld.
* Sharpened on two sides, the sharp end allows for penetration between the panels and the edges allow for side impact to lever the panels.
* Blade width: 25mm
* Blade Depth: 18mm
* Overall length: 300mm

Straight Seam Splitter
* For quarter panels, rockers and any other pinch weld.
* Sharpened on two sides, the sharp end allows for penetration between the panels and the edges allow for side impact to lever the panels.
* Blade width: 25mm
* Overall length: 300mm

Spare Tips

To suit the T-Handle Circlip Tool

In a tough steel case. Protected against reverse polarity. Fitted with heavy-duty charge leads and crocodile clips. Easily accessible internal fuses. Ammeter for charging indication. Made in EU. Ideal for heavy duty garage and workshop use.

05535

• 230v (16amp) supply
• 12/24v charging voltages - for added versatility
• 45amp maximum charging current for high capacity batteries and quick charging
• Super powerful 280amp maximum boost rate
• High 220Ah battery capacity
• Ammeter for clearly and accurately charging indication
• 2 charge rate levels – for fast and slow charging
BADGES: Made in EU, NEW

Kennedy Specialist Automotive Tools

For the in-situ installation of the rear axle mounting bushes on selected:

VW and Audi vehicles such as Audi A3, VW Bora & Golf IV.

Rear Axle Bush Installation Tool