Kennedy Automotive Service Tools

Kennedy Remote Hose Clamp Pliers are for the removal and replacement of fuel, oil and water hoses, suitable for working in confined engine compartments.

Flexible 530mm long reach ratchet mechanism allows the pliers to release and lock hose clamps in the opened position.

Supplied complete with a cable clamping nipple for use when replacing the cable.

Capacity: 55mm.

Remote Hose Clamp Pliers

Hydraulic Ram

Rugged construction with a heavy duty return spring. Chrome plated piston inhibits rusting.

Push type

4 Ton capacity.
For use with 22mm diameter accessories.
65cc oil capacity.
10cm (4&34;) stroke.
1/4" NPT thread size.
Accessories easily snap on.

Panel Beating Dolly

Manufactured from drop forged medium carbon steel (SAE/AISI 1055). Heat-treated with a polished mirror finish.

Double End Hand Dolly

For reshaping crowned panels and general panel beating.

Brake Pin Punches

Parallel pin punches for the removal of brake calliper pad retaining pins. 165mm overall length. 6.0mm diameter punch uses a pilot tip to aid location in hollow pins used on GM/Vauxhall callipers. Overall length: 165mm.

Hydraulic Nut Splitter Set

The hydraulic ram provides up to 10 tonnes of direct non-twisting application of thrust that is more effective and secure then a mechanical thrust screw. Fully threaded body allows for quick and easy adjust height adjustment. The splitter bodies are manufactured from carbon steel.



Contents: 1 x hydraulic ram. 1 x splitter body 3/8" diameter capacity. 1 x splitter body 1/2" diameter capacity. 1 x splitter body 5/8" diameter capacity. 1 x splitter body 3/4" diameter capacity. 1 x splitter body 1" diameter capacity, 1 x threaded attachment sleeve, 1 x oil bottle

Spare Parts for Kennedy Parts Washers

Flexible Hose for PWB013

Commercial Duty Circuit Tester 6 to 24V

Suitable for use with power on. For 6/12/24V automotive systems only. Locates shorts, earths & open circuits. Probe length, 103mm. 1.4m heavy duty lead with spring strain relief. Super sharp stainless steel probe to test through wire insulation.



Super sharp tempered steel probe circuit tester to test through wire insulation when power is switched on. Tests 6, 12 & 24V an automotive system only, locates earth, short and open circuits. Tester is fitted with a 1.4m heavy-duty lead with spring strain relief, 103mm probe and a strong semi-transparent plastic handle.

Sykes-Pickavant Piston Ring Compressors

For holding piston rings in place once removed from the cylinder. Made from tempered spring steel with spring assisted ratchet type lock. Supplied complete with square drive key. 3 lengths available - 660372: 60mm. 660370 and 660373: 80mm. 032200: 165mm.

Kennedy Bottle and Trolley Jacks

Kennedy trolley jacks have strong; robust steel chassis?s to provide stability when under load. Heavy duty fixed direction casters and swivel castors ensure easy positioning under the vehicle prior to lifting. The long reach single piece pump handle with comfort rubber grip is to rapidly raise and lower the load arm and the vehicle. A Safety overload protection valve prevents overload damage to hydraulic mechanism. Integral carry handle.

GS and TUV approved.

For use on a firm level surfaces.
DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

2 Tonne Quick Lift Trolley Jack

Model number: T238
Maximum load: 2 tonnes
Dimensions (L x W x H): 525 x 225 x 145mm
Minimum height: 130mm
Maximum height: 380mm
Weight: 12kg

(Load ratings are Metric Tonnes i.e. 1 tonne 1,000kg).

Brake Calliper Spreader

For retracting brake calliper pistons can be used with 1/2 " sq drive ratchet and 21mm hex wrench or spanner and is suitable for use on most cars and motorcycles. Constructed from hardened steel with phosphate finished spreader plates for corrosion protection.