Heavy Duty Hose Clip Pliers - Clic Compatible

With steel Jaws and PVC coated handles, these spring loaded heavy duty dual purpose pliers are designed for fitting and removing Clic and Clic-R® hose clips.

Ball Joint Servicing Kit

Made from cast iron and hardened carbon steel, this kit is designed for the removal of press fit type ball joints without having to remove the control arm from the vehicle. The kit can also be used for removing brake anchor pins and the servicing of universal joint bearings.

500kg Engine Support Beam

For supporting and accurately positioning engines during maintenance operations and as an aid for the removal of gearboxes and transmissions. 500kg (1/2 tonne) capacity. Adjustable width to bridge various engine compartments. Fitted with soft rubber feet to protect the bodywork. Fine adjustment is obtained by using a threaded hook. Supplied with a 92cm long chain. Supporting legs can be tilted forwards and backwards to match the angle of the inner wing panels.

Body Repair Kit Spares

Spares for hydraulic hand pumps



For Collision Repair Kit

Circuit Continuity Tester

For testing circuit continuity on non-live systems Locates broken circuits in fuses, switches, sockets and wires Metre lead Super sharp tempered steel probe to test through wire insulation Requires AA battery (not supplied).



Super sharp tempered steel probe circuit continuity tester to test through wire when power is switched off. Locates broken circuits in fuses, switches, sockets and wires. Tester is fitted with a 1.1m lead and a strong transparent plastic handle. Requires one AA battery (supplied separately.)

Spares

To suit hand pumps

Connection Hose

Kennedy Automotive Timing Tools

The Kennedy Noid light test set is for diagnosing fuel injector signal faults fast. Simply disconnect the injector harness and plug in the relevant noid light. Turn the ignition on - if the light is constant or absent, then the signal from the ignition system is at fault. Easy to use and fits a wide variety of injector harnesses.

Compatible with:
GM - TBI GM - SCPI
GM - PFI FORD - TBI
GEO - TBI BOSCH - PFI

NLT060 Noid Light 6 Piece Test Set

Compatible with:
GM - TBI GM - SCPI
GM - PFI FORD - TBI
GEO - TBI BOSCH - PFI

Hydraulic Hand Pump

Rugged construction. Internal overload valve prevents it from being used beyond its rated capacity. Operates in a vertical and horizontal position.

Single speed

Pressure rating 1000psi (700bar).
Usable oil capacity 600cc.
1/4" NPT thread size.
Carrying handle for easy portability.

5-Piece Trim Remover Set

5 piece set of angled lever tools designed for the safe and undamaged removal of trim and trim stud panels.
Manufactured from Hi-tech resilient plastic that avoids marking and scratching to polished metal, wood or leather trims.

Seal Puller Tool

Two size tips allow you to remove oil or grease seals from virtually anything including wheel bearings, transmission housings, etc. Hardened and tempered carbon steel shank and head with oxidised finish tips. Chrome plated shank for protection against corrosion. Impact resistant square section handle for secure grip even when greasy. Overall length: 310mm (12 1/4")