Kennedy Hydraulic Bottle and Trolley Jacks

Kennedy Hydraulic bottle jacks have large cast iron bases with a steel housing and lift cylinder, that has an adjustable notched load saddle. Each jack is fitted with an overload protection valve. Two piece pumping handle also operates hydraulic release.

For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place

GS and TUV approved.

For axle stands see order codes: KEN-503-5520K and KEN-503-5530K.

Hydraulic Bottle Jacks

Model number: B5048
Maximum load: 50 Metric Tonnes.
Height range: 300-480mm Min/Max.Max saddle adjustment: 80mm.
Weight: 34kg.

(Load ratings are Metric Tonnes i.e. 1 tonne = 1,000kg).
Supplied with spare seals.

Kennedy Ball Joint Separator

Manufactured from drop forged alloy steel with slim tapered fork jaw for easier access into confined areas. Suitable for use on most car and light commercial vehicle ball joints.

Kennedy Tyre Pressure Gauges

In the interests of safety, tyre pressures should be checked at least once a week when the tyres are cold. This is because manufacturers" recommended pressures are based on cold tyre readings.

Dial Type Tyre Pressure Gauge

This push-on type pressure gauge is graduated in psi and bar up to a maximum of 64psi (4.5bar). The reading is held until the release button is pressed.

Exhaust Doughnut Puller

To enable fast Installation or removal of rubber anti-vibration mounting rings found on modern exhaust systems. Puller has offset hook for easier application and dipped vinyl handle for added comfort and extra grip. Manufactured from hardened steel. Length: 290mm

Moore & Wright Digital Tyre Profile Gauge

MW176-01DTG:
Capacity: 0-25mm/1".
Resolution: 0.01mm/0.0005".

Features: Spring loaded with a hold measurement button for ease of use. Large LCD display.
Supplied with vinyl holder.

Baty Mini Digital Tyre Pressure Gauge

Suitable for measuring of unit of pressure, PSI, Bar, Kgf/cm2 or Kpa.
Large LCD display
Manual power On/Off



Specification
Range; 0-100PSI
0-7.0 Bar
0-7.0Kgf/cm2
0-700Kpa
Display; 23x20mm LCD
Power; CR-2032 3V Lithium battery
Operation Temperature; -5-50 deg C (23-122 deg F)
Storage Temperature; -20-70 deg C (-4-158 deg F)

Torsion Spring

To suit the Kennedy Heavy Duty Trolley Jack (KEN-503-6920K)

Ratcheting Hose Pinch Pliers

For clamping flexible brake lines, fuel lines, vacuum hose and other fluid lines. Allows servicing to be carried out without the need for system draining. Heavy duty serrated jaw edges provide excellent clamping whilst avoiding damage to hoses. Jaws pivot and self level to ensure parallel clamping.
Fine-adjusting ratchet action allows hoses to be fully or partly closed. Cocking mechanism holds pivot jaws firmly in position. All steel construction with corrosion resistant finish.



300mm (12") Long.
For hoses up to 40mm diameter

Kennedy 2-in-1 Creeper & Seat

Heavy duty steel frame with powder coat finish. Vinyl coated cushioning. Quickly converts from creeper to seat. Adjustable back and parts tray when in the seat position.

Nut Splitters

Mechanical drop forged, hardened and tempered plated steel. Ideal for releasing seized/damaged nuts etc.



Set of 4 - Contents:
(1 of each): 3/8-1/2"AF (9-12mm) No.1, 1/2-5/8"AF (12-16mm) No.2, 5/8-7/8"AF (16-22mm) No.3, 7/8-1.1/16"AF (22-27mm) No.4.