Matlock™ Parts, Component and Tool Storage Bins

Matlock™ high strength Polypropylene storage bins are designed to solve your storage problems, they are suitable for small to large component or part storage. The versatile Matlock™ storage bin can be interlocked side by side, nested on top of each other, hung on steel louvred panel (supplied separately) or using riser rods (supplied separately) they can be stacked on top of each another, this functionality allows you to create the storage system to satisfy your specific requirement.

Matlock™ storage bins are available in seven sizes and a choice of four colours blue, green, red and yellow and can be fitted with label holders (supplied separately).

For all dimensional specifications and accessories please refer to our catalogue.

Plastic Storage Bins

Matlock™ Plastic Storage Bin Size: No.2 Dimensions 237x157x132mm(LxWxH)

Precision Ground Flat Stock (18")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".

Kennedy® Industrial Key Steel

High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. Inch manufactured from: BS46 PART 7 1958 grade steel. Length: 300mm and 12". Other sizes available on request.

Rectangular - Inch

Precision Ground Flat Stock (18")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".

Silver Steel

For tool room and general engineering. Applications include screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel, engraver tools. High carbon content means that it can be hardened to give high wear resistance and chromium content adds strength and hardness.

Manufactured from
BS1407:1970 grade steel.

Typical hardness:
207-237HB with 285HB maximum.

Tensile strength:
45/55 T.P.S.I. (700/850 N/mm2).

Surface finish:
Better than 0.6 microns (25 micro inch) CLA (Centre Line Average).

Chemical analysis range:
Carbon 0.95 - 1.25%
Silicon 0.40% max
Manganese 0.25 - 0.45%
Phosphorous 0.045% max
Sulphur 0.045% max
Chromium 0.35 - 0.45%

Chemical analysis typical:
Carbon 1.13%
Silicon 0.22%
Manganese 0.37%
Phosphorous 0.014%
Sulphur 0.018%
Chromium 0.43%

Inch round sizes

Tolerances:
Below 1" plus/minus 0.00025".
1" up to and including 2" plus/minus 0.00050".

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Light Load Springs Colour-Coded Green

Senator® Parts, Component and Tool Storage Bins

Senator® high strength Polypropylene storage bins are designed to solve your storage problems, they are suitable for small to large component or part storage.

The versatile Senator® storage bin can be stand alone, nested on top of each other or hung on louvred panels allowing you to create the storage system to satisfy your specific requirement.

Senator storage bins are available in 3 sizes and a choice of blue, green, yellow or red and can be fitted with label holders (supplied separately).

For all dimensional specifications and accessories please refer to our catalogue.

Plastic Storage Bins

Size: 165 x 110 x 75mm.

Lathe Chuck Keys

Supplied as standard with all Indexa lathe chucks. Manufactured from high quality steel, ground finish body, sliding T-Bar and spring return fitted to square drive. Suitable for use with all other makes of square drive adjusting lathe chucks.

Perfo Storage Accessories

The accessories are quickly secured to our Perfo panels with our Perfolock and may be repositioned at any time. All items are manufactured from steel and are zinc plated to give a long, corrosion-resistant life. The standard kits provide easy selection and ordering for Perfo accessories. For custom layouts choose from our range of Perfo accessories. Securely fastened to panels in seconds with Perfolock clips. Remove or reposition as required. Hook ends capped for safety.

Double Spring Clips (Pack of 5)

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Light Load Springs Colour-Coded Green