Workshop Computer Workstations

650/1000mm wide x 550mm deep lockable cupboards with cable routing apertures. Lockable slide out keyboard tray, slide out shelf - ideal for printers (650mm wide model only). Static shelf, adjustable on 25mm pitch with 50kg UDL. Lockable ventilated monitor housings, sloping writing surface (1000mm wide models only).

Optional File Holder

File holding shelf to suit 1000mm wide model.

Steel Locker

Hat shelf and 2 x coat hooks fitted in the single door locker (450mm deep locker also has a hanging rail), 2 x coat hooks fitted in each compartment of the 2-tier locker. BSI Quality Assured (meet the requirements of British Standard for Clothes Lockers BS4680:1996 ?Standard Duty?).

Picture for illustration only not accurate for colour.

Senator® Portable Bench Vice (60mm)

Lightweight and portable mini vice.
Ideal for workshop, engineering and automotive use. Can be fitted to any convenient work surface. Solid cast grey iron body with steel guide rods and main screw.
180° rotating and locking vice head.
Maximum jaw opening 65mm (2,1/2").
Jaw width: 60mm (2,1/2").
Jaw height: 30mm (1,1/8").
Max. table lock depth: 45mm (1,3/4").
Vice width: 2.13kg.

Kennedy® Industrial Key Steel

High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. Inch manufactured from: BS46 PART 7 1958 grade steel. Length: 300mm and 12". Other sizes available on request.

Rectangular - Inch

Matlock Industrial Cupboards and Lockers

The Matlock garment dispenser lockers have a single service door provides access to all the inner compartments of these garment dispensers enabling the distribution of clean garments, towels, etc. Individual compartments remain secure and require keyed access.

Garment Dispenser Locker

Fixture Components

Material: Medium Carbon Steel. Hardness: HRC 28-32

FC09 - Swing Bolt

Bench Assembly Units

A free standing unit supporting a louvre Panel for use on benches or tables. Available in one height and two widths. Kit comprises: Louvre Panel, support rods and fixings.
Colour: Light grey

Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Support Fixture Components

Material: Medium Carbon Steel. Surface Finish: Manganese Phosphate

SU25 - Step Block

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Extra Heavy-Load Springs Colour Coded Yellow