产品 / 工装夹具
品牌
分类
垫片
机床附件
可移动组合木工工作台
仓库用货架设施
齿型固定夹
工业级钥匙钢
工业级钻套
滚花刀
过磁器
机床防溅视窗
机床用冷却液管路系统
剪板机
可移动组合木工工作台
快换式刀座
快速异型夹
模具弹簧
平面平整块
三爪卡盘
砂轮修整器/笔
生产用工具标准放置器具
生产用物流设施& 规范放置器具
台虎钳&平口钳
特种物品专业放置柜
旋转卡盘
压板
银器钢
专业刀具放置
专业钢制工作台
专业生产用工具箱
钻夹头
P250 PUSH-PULL TOGGLE CLAMP

P250 PUSH-PULL TOGGLE CLAMP

编号:BRA4101201B
●产品描述:
Heavy Duty Push-Pull Clamps

Features: These clamps are of exceptionally robust construction featuring cast and machined handles and bases. The clamps are designed with a low plunger height and with the mechanism guarded within the base to avoid finger traps. Specification: The bases of all models are machined S.G. iron castings. The plungers are of steel, and their precision ground diameter runs in a close-tolerance hole in the base casting. All axles are of hardened steel and run in either the S.G. iron of the handle, or in the close-toleranced holes of hardened parts. All models are supplied with a steel setscrews finished chemi-black.



3/8

3/8"x5/8"x18" GROUND FLAT STOCK

编号:CTL4130902C
●产品描述:
Precision Ground Flat Stock (18")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".
25mmx125mmx500mm GROUND FLAT STOCK

25mmx125mmx500mm GROUND FLAT STOCK

编号:CTL4134408J
●产品描述:
Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.
16917230.11V VERSO RACK 5 PANEL HIGH DS LVR + BINS

16917230.11V VERSO RACK 5 PANEL HIGH DS LVR + BINS

编号:BOT4053369H
●产品描述:
Bott Louvre Panel Racks

All models 1000mm wide x 550mm deep. Double or single sided versions. Complete with bin kits. Epoxy powder coat finish. Optional base tray available for all models.

1775mm High Static Rack - Double Sided

16917230.11V
Bin kit: 240x No.2 bins blue.
NEOPRENE CAP FOR 3/8

NEOPRENE CAP FOR 3/8" ADJUSTABLE SPINDLE

编号:IND4438640K
●产品描述:
Toggle Clamp Spares

For standard adjustable spindles.

Neoprene Caps

MLB-20x51 BLUE DIE SPRING - MEDIUM LOAD

MLB-20x51 BLUE DIE SPRING - MEDIUM LOAD

编号:IND4606330H
●产品描述:
Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Medium Load Springs Colour-Coded Blue

SEN2 PLASTIC STORAGE BINYELLOW

SEN2 PLASTIC STORAGE BINYELLOW

编号:SEN4041020Y
●产品描述:
Senator® Parts, Component and Tool Storage Bins

Senator® high strength Polypropylene storage bins are designed to solve your storage problems, they are suitable for small to large component or part storage.

The versatile Senator® storage bin can be stand alone, nested on top of each other or hung on louvred panels allowing you to create the storage system to satisfy your specific requirement.

Senator storage bins are available in 3 sizes and a choice of blue, green, yellow or red and can be fitted with label holders (supplied separately).

For all dimensional specifications and accessories please refer to our catalogue.

Plastic Storage Bins

Size: 240 x 155 x 125mm.
005429 600 3MT REVOLVINGCENTRE

005429 600 3MT REVOLVINGCENTRE

编号:ROM4882030K
●产品描述:
Revolving Centres

Manufactured from hardened and ground high grade tool steel, for improved resistance to wear extending tool operating life. Precision manufactured bearings evenly distribute axial load for smooth operation, reducing friction and heat build up. The bearings are protected by seals to prevent dirt and coolant ingress. Modern bevel head design allows unhindered approach of toolholders and lathe tools to the workpiece.

Type 600

With small case diameter
HLR-50x64 RED DIE SPRING- HEAVY LOAD

HLR-50x64 RED DIE SPRING- HEAVY LOAD

编号:IND4601785S
●产品描述:
Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Extra Heavy-Load Springs Colour Coded Yellow

TK12 M12-14mm T-SLOT CLAMPING KIT (58-PC)

TK12 M12-14mm T-SLOT CLAMPING KIT (58-PC)

编号:IND4253612T
●产品描述:
T-Slot Clamping Kits

Designed to save set up time and solve most T-Slot clamping problems. All Components are manufactured from S45C (JIS)/CK45 (DIN) grade non alloy carbon steel. Heat treated to HRC 28-32 and have a manganese phosphate surface finish. Supplied in a robust plastic case.



Contents: Engineers Studs (4 off each): 75, 100, 125, 150, 175 & 200mm long. Step Blocks (4 off each): 28, 35 & 98mm high. Step Clamps (2 off each): 64, 100 & 150mm long. Nuts Extension 4 off Flanged 6 off T- slot 6 off.