Matlock Shelving and Racking

Matlock Euro shelving is available in a range of sizes and configurations to meet your specific storage requirement. The heavy duty all steel shelving system has a 200Kg UDL* per shelf capacity making it ideal for industrial storage.

Features include:
The shelving bays are available with solid cladding or open/braced backs and sides. Shelve height is adjustable and are fitted on clips for easy repositioning.
High quality, light grey powder coat finish.
Biocote antimicrobial protection reduces levels of bacteria on surfaces by up to 99.99% .
Up to 200Kg UDL* capacity per shelf.
Self Assembly tools required.

Please refer to the catalogue PDF for all dimensional information.

*Uniformly Distributed Load

Open Bay Euro Shelving

Precision Brand Steel Shims

All shims are marked with material type, size, thickness and a tracking lot number. Full hard, cold rolled, low carbon 1008-1010.
Hardness: <.069” thick Rockwell B90 min. >.070” thick Rockwell B84 min.
Conforms to: AISI-1008/AISI-1010.

Steel Shims - Inch Sizes

Steel Lockers

Steel lockers with a vibrant Design and choice of colour to suit any environment. Each compartment has air vents that allows each compartment to breathe. 10 disc secure locking system supplied with two keys as standard giving a high level of security. All doors are manufactured from 0.9mm steel and to add further strength and rigidity a steel channel is welded into the inside of every door and each compartment. Lockers are supplied in a quality cardboard box to ensure they arrive to you in pristine condition.

Heavy Duty Drawer Cabinets

Create a clean, safe and well-organised storage space with heavy duty drawer cabinets. High capacity units in 5 different plan sizes. All cabinets are fully lockable and finished in epoxy powder coat RAL7035 grey with RAL5010 blue fronts. 75kg U.D.L. capacity per drawer with 100% extension slides.
Drawer dividers are available - steel slotted or plastic box kits.

Size: 650 x 650mm (W x D)

900mm Height

Kennedy® Taper Socket Cleaners

Will remove large residual particles of grease, dust and swarf from internal sockets. Maintains precision and prolongs life of tool holders.

Engineers Workbenches

Available with the following worktop finishes.
Wisa - Laminated ply core with mid grey polypropylene face. An easy clean top with good resistance to oil, grease, mild alkalis and weak acids.
Mfc - Particle board core with light grey laminate face. A light duty easy clean top suitable for assembly or office environments.
Mpx - Laminated beech ply. A tough, general duty top suitable for most applications.

Pedestal bench

For optimum access and flexibility each pedestal bench leg is adjustable, giving height adjustment from 780 - 930mm.
The 30mm worktop is available in multiplex or wisa.

Kennedy® Abrasive Wheel Dressers

Conventional abrasive wheels need truing and regularly dressing to maintain a quality grinding performance, Kennedy single point diamond dressing tools have a single industrial diamond embedded in a cylindrical steel shaft they are suitable for performing both of these applications:

Truing is the process of aligning the periphery of the grinding wheel so that it runs concentric with its axis of rotation. This allows accurate and precise relative motion between the grinding wheel and the part being ground.

Dressing removes dulled abrasive and foreign material that has been embedded into the wheel. This allows the wheel to cut properly. Kennedy diamond dressing tools are mainly used to true straight-faced grinding wheels.

Single-Point Diamond Dressing Tool

Available with in a range of Diamond Carats, all with 13x150mm (1/2”x6”) Diameter x Length steel shafts:

0.50 Carat Order Code: KEN-496-0050K.
0.75 Carat Order Code: KEN-496-0070K.
1.00 Carat Order Code: KEN-496-0100K.
1.50 Carat Order Code: KEN-496-0150K.
2.00 Carat Order Code: KEN-496-0200K.

Heavy Duty Tool Storage System

Heavy duty industrial cupboards with double locking doors. Finished in epoxy powder coat RAL7035 with doors in blue RAL5010. Perforated door liners will accept tool holders. Security is ensured by a 3 point locking system. Shelves and drawers are adjustable on a 25mm pitch. Drawer dividers are available separately. Load capacity per shelf 100kg. 75kg U.D.L. capacity per drawer with 100% extension slides. Overall load capacity 1.5 ton.
Dimensions (W x D x H): 1050 x 650 x 2000mm.

Complete with Shelf Kit

Silver Steel

For tool room and general engineering. Applications include screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel, engraver tools. High carbon content means that it can be hardened to give high wear resistance and chromium content adds strength and hardness.

Manufactured from
BS1407:1970 grade steel.

Typical hardness:
207-237HB with 285HB maximum.

Tensile strength:
45/55 T.P.S.I. (700/850 N/mm2).

Surface finish:
Better than 0.6 microns (25 micro inch) CLA (Centre Line Average).

Chemical analysis range:
Carbon 0.95 - 1.25%
Silicon 0.40% max
Manganese 0.25 - 0.45%
Phosphorous 0.045% max
Sulphur 0.045% max
Chromium 0.35 - 0.45%

Chemical analysis typical:
Carbon 1.13%
Silicon 0.22%
Manganese 0.37%
Phosphorous 0.014%
Sulphur 0.018%
Chromium 0.43%

Metric round sizes

Tolerances:
Up to 25mm plus 0 - 0.012mm.
Over 25mm up to and including 50mm plus 0 - 0.0250mm.

Kennedy® Huntington Type Dressers Replacement Wheel Sets

Replacement dressing wheels for Kennedy Huntington wheel dressers.