Step Clamp

Material: Medium Carbon Steel.
Hardness: HRC 32 - 38.
Surface Finish: Black Oxide.

Kennedy® Industrial Key Steel

High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. Inch manufactured from: BS46 PART 7 1958 grade steel. Length: 300mm and 12". Other sizes available on request.

Rectangular - Metric

Silver Steel

For tool room and general engineering. Applications include screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel, engraver tools. High carbon content means that it can be hardened to give high wear resistance and chromium content adds strength and hardness.

Manufactured from
BS1407:1970 grade steel.

Typical hardness:
207-237HB with 285HB maximum.

Tensile strength:
45/55 T.P.S.I. (700/850 N/mm2).

Surface finish:
Better than 0.6 microns (25 micro inch) CLA (Centre Line Average).

Chemical analysis range:
Carbon 0.95 - 1.25%
Silicon 0.40% max
Manganese 0.25 - 0.45%
Phosphorous 0.045% max
Sulphur 0.045% max
Chromium 0.35 - 0.45%

Chemical analysis typical:
Carbon 1.13%
Silicon 0.22%
Manganese 0.37%
Phosphorous 0.014%
Sulphur 0.018%
Chromium 0.43%

Inch round sizes

Tolerances:
Below 1" plus/minus 0.00025".
1" up to and including 2" plus/minus 0.00050".

Kennedy® Serrated Soft Jaws

To suit metric serrated power chucks (Kitagawa, Howa, Matsumoto, Pratt Burnard, SMW and Autoblok etc).

3 Jaw Sets

CNC Tool Inserts

For use in conjunction with empty tool carrier blocks.

Modular Coolant Hose System

Male threads

Threaded Spigots

For drawers 800 x 750mm (W x D)

13 Compartment

Horizontal Industrial Toggle Clamps

With a low profile design suitable for use in applications requiring increased access to the actual workpiece. Available in 8 sizes for general application in areas where a lower profile is required. Force applied downwards 90 to bar.

'U' Bar (Adjustable) Type

Hexagon Head Spindle

Bott Louvre Panel Racks

All models 1000mm wide x 550mm deep. Double or single sided versions. Complete with bin kits. Epoxy powder coat finish. Optional base tray available for all models.

1775mm High Static Rack - Single Sided

16917302.11V
Fittings: 40 piece hook kit.

Drawer Divider Kits

Customise your storage system with a high quality range of drawer division accessories. Steel variable divider kits
manufactured from galvanised sheet steel or plastic box kits in RAL7011 impact resistant polystyrol.

For drawers 525 x 525mm (W xD)

5 Compartment