Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Medium Load Springs Colour-Coded Blue

Kennedy Steel Shims

Designed to achieve accurate alignment. High quality steel to prevent corrosion from exposure to acids or alkalis. With rounded corners, perfectly deburred for maximum safety. Permanent markings indicate thickness and dimensions. Extraction and insertion tabs facilitate positioning and removal of the shims.
EN2. CS4 fully hardened bright mild steel. 6” wide. 1lb tins.

Steel Shims - Inch Sizes

Matlock Shelving and Racking

Matlock Euro shelving is available in a range of sizes and configurations to meet your specific storage requirement. The heavy duty all steel shelving system has a 200Kg UDL* per shelf capacity making it ideal for industrial storage.

Features include:
The shelving bays are available with solid cladding or open/braced backs and sides. Shelve height is adjustable and are fitted on clips for easy repositioning.
High quality, light grey powder coat finish.
Biocote antimicrobial protection reduces levels of bacteria on surfaces by up to 99.99% .
Up to 200Kg UDL* capacity per shelf.
Self Assembly tools required.

Please refer to the catalogue PDF for all dimensional information.

*Uniformly Distributed Load

Open Bay Euro Shelving

Ball Bearing Super Chuck

Designed for extra heavy duty drill applications such as industrial drilling machines, jig borers, milling machines, lathes, radials and CNC/NC machining centres. Each chuck features ball bearing construction to maximise the gripping force and accuracy, through hardened sleeve teeth plus hardened nose and keyholes to provide wear resistance. The centre ground jaws are specially heat treated to ensure high gripping surface hardness.

Atlas? Swivel Base Vices

Plain jaw milling machine vices are used for holding work that has parallel sides. The swivel base is graduated in degrees and allows the vice to swivel in the horizontal plane. The swivel base gives the vice a greater degree of versatility, but should be avoided when carrying out heavy rough cutting operations because it reduces the rigidity of the setup. Manufactured in accordance with stringent quality criteria and moving parts are tested for parallelism and perpendicularity in no less than eight tests - all to minute tolerances. All models are designed for milling, planing and drilling applications and are available with or without swivel bases.

Precision Brand Steel Shims

All shims are marked with material type, size, thickness and a tracking lot number. Full hard, cold rolled, low carbon 1008-1010.
Hardness: <.069” thick Rockwell B90 min. >.070” thick Rockwell B84 min.
Conforms to: AISI-1008/AISI-1010.

Steel Shims - Metric Sizes

Kennedy® Heavy-Duty Industrial Keyed Drill Chuck

Fully hardened and ground working parts. The jaws are centre ground for alignment and concentricity. Keyholes and teeth are fully hardened for durability and wear resistance. To correctly tighten your keyed drill chuck use all key holes in turn to guarantee even pressure and maximum grip. Suitable for use on machine tools and all types of industrial power tools. Supplied with key. Manufactured to DIN 6349.

Free Standing Racks

Available in two heights and two widths. Made from 16swg channel section which supports Louvre Panels either single or double sided.
Colour: Dark grey/light grey

High Speed Steel Knurls

Precision hobbed to produce burr-free clean cut knurls.

Left Hand

Rubber Flex Tap Chuck Collets

Designed for use with the Jacobs Tap Chucks and are unique in providing at least twice the gripping power of a conventional split steel collet. Features include: Parallel jaw inserts exert uniform and accurate gripping over the collet length. Durable one-piece construction resists heat, coolants and cutting compounds. Steel jaw inserts precision ground and hardened to ensure maximum gripping accuracy and wear resistance. *J116 and J117 may be used as replacements for J112, J113, J114.