Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Extra Heavy-Load Springs Colour Coded Yellow

Kennedy® Morse Taper Tooling

A range of quality traditional workholding equipment. Manufactured from high quality steel and case hardened all over. All sleeves and sockets are fully hardened and ground internally and externally. ISO 238 BS 1660 : 2.

Turret Sockets

Kennedy® Industrial Key Steel

High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. Inch manufactured from: BS46 PART 7 1958 grade steel. Length: 300mm and 12". Other sizes available on request.

Rectangular - Inch

Steel Lockers

Steel lockers with a vibrant Design and choice of colour to suit any environment. Each compartment has air vents that allows each compartment to breathe. 10 disc secure locking system supplied with two keys as standard giving a high level of security. All doors are manufactured from 0.9mm steel and to add further strength and rigidity a steel channel is welded into the inside of every door and each compartment. Lockers are supplied in a quality cardboard box to ensure they arrive to you in pristine condition.

Kennedy® Standard Duty Revolving Centres

Manufactured from high alloy steel hardened and tempered then precision ground externally. Precision bearings are fitted as standard and the centres have a 60° point. Maximum Runout: No 1 to 4 taper: 0.005mm, No 5 to 6 taper: 0.010mm.

Matlock? Industrial Racking and Shelving

Easy assembly shelving offering a fast and economic solution to storage and production problems. Shelves slot and lock into uprights removing the need for fasteners, fixings and tools. Supplied with 18mm chipboard shelves. Extra shelves are available on request. Shelving can be designed to suit your space requirements. Connector plates are required to construct shelving runs (four plates per join).
Standard Duty
Ideal for light to medium weight storage of archive boxes, bankers boxes, box files, arch files, magazine holders, paint tins and boxes of stock. Contents: four uprights, five shelf levels with J-beams, feet and assembly instructions. Supplied as graphite grey uprights with light grey shelves.

QuickRack Standard Duty Shelving Bay 1980x1200x300mm (HxWxD)

Matlock QuickRack industrial standard duty racking and shelving is ideal for light to medium weight storage of archive boxes, bankers boxes, box files, arch files, magazine holders, paint tins and boxes of stock.

Contents: 4 uprights. 5 shelf levels with J beam shelf supports. Support feet and assembly instructions.
Maximum load per shelf: 350Kg

Precision Ground Flat Stock (18")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".

Kennedy® Industrial Key Steel

High grade mild steel. Available in square or rectangular sections. Metric manufactured from: BS4235 Part 7 1972 grade steel equivalent to DIN 6885. Inch manufactured from: BS46 PART 7 1958 grade steel. Length: 300mm and 12". Other sizes available on request.

Square - Inch

Kennedy® Diamond Point Wheel Dressing Tools

Multi-point diamond dresser that gives rapid dressing without scoring whilst producing a consistent even surface on the grinding wheel. Designed to give constant exposure of diamond edges and points, ensuring a consistent, smooth dressing action. Directly replaces single point tools but without the need for resetting due to point wear.

Multi-Point Tools

Precision Brand Steel Shims

All shims are marked with material type, size, thickness and a tracking lot number. Full hard, cold rolled, low carbon 1008-1010.
Hardness: <.069” thick Rockwell B90 min. >.070” thick Rockwell B84 min.
Conforms to: AISI-1008/AISI-1010.

Steel Shims - Metric Sizes