Kennedy® Serrated Soft Jaws

BSW serrations. To suit inch serrated Coventry/Tudor manual chucks.

3 Jaw Sets

Standard

Engineers Workbenches

Available with the following worktop finishes.
Wisa - Laminated ply core with mid grey polypropylene face. An easy clean top with good resistance to oil, grease, mild alkalis and weak acids.
Mfc - Particle board core with light grey laminate face. A light duty easy clean top suitable for assembly or office environments.
Mpx - Laminated beech ply. A tough, general duty top suitable for most applications.

Cantilever bench

Perfect for assembly applications, the cantilever frame comes complete with a 20mm worktop in either multiplex or mfc.
Full range of accessories available, including overhead kits
and suspended cabinets. Flat packed for self assembly.
Height: 780mm.

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Extra Heavy-Load Springs Colour Coded Yellow

Precision Brand Stainless Steel Shims

Full hard, cold rolled, Type 302.
Rockwell hardness: C40 - 45.
Meets SAE 30302; AISI-T302; ASTM A-666 Ultimate.

Tensile strength: 185,000psi min.

Stainless Steel Shims - Metric Sizes

Rectangular Magnetic Chucks

Standard range chucks are designed to give high performance combined with competitive pricing. Using high energy rare earth permanent magnets they give an evenly distributed clamping force. Trouble-free operation is assured with a rugged but accurate build.
Supplied with:
Brass and steel top plates.
Removable hexagon key handles ensure ease of operation through a 180 arc.
All chucks are supplied with clamps, side and end stops.



These chucks are primarily designed for grinding operations. They will effectively clamp all workpiece thicknesses down to 3mm.
Standard Pole.
Pole spacing: 4.0mm steel / 2mm brass.
Force: 80N/cm2.

Step Clamp

Material: Medium Carbon Steel.
Hardness: HRC 32 - 38.
Surface Finish: Black Oxide.

Matlock™ Industrial Racking and Shelving

Matlock™ QuickRack industrial racking and shelving is a flexible, simple and cost effective solution to your storage problems. Assembly of the shelving couldn't be simpler, simply slot and tap the frame work together as there are no fiddly nuts and bolts. Each shelving bay is supplied with 18mm thick shelves, extra shelves are available on request, allowing you to design shelving bays to suit your specific space/storage requirements. THIS IS A SHELF UNIT ONLY

QuickRack Additional Standard Duty Shelf Kit 1200x450mm (WxD)

The additional shelf kit from Matlock Quickrack contains everything you need to add a single shelf to an existing bay of Matlock Quickrack racking.

CNC Tool Inserts

For use in conjunction with empty tool carrier blocks.

Stainless Steel Shim

Precut 300 Series
The best way to solve alignment and levelling problems on motors, pumps, generators and other plant machinery! The pre-cut shims are safer and easier to position as the tab eliminates the need to place hands under machinery during installation or removal of the shim. Engineered for quality, all shim thickness tolerances meet industry standards and conform to standard bolt and stud sizes. Each shim is clearly marked with its thickness.

Steel Locker

Hat shelf and 2 x coat hooks fitted in the single door locker (450mm deep locker also has a hanging rail), 2 x coat hooks fitted in each compartment of the 2-tier locker. BSI Quality Assured (meet the requirements of British Standard for Clothes Lockers BS4680:1996 ?Standard Duty?).

Picture for illustration only not accurate for colour.