Perfo Storage Accessories

The accessories are quickly secured to our Perfo panels with our Perfolock and may be repositioned at any time. All items are manufactured from steel and are zinc plated to give a long, corrosion-resistant life. The standard kits provide easy selection and ordering for Perfo accessories. For custom layouts choose from our range of Perfo accessories. Securely fastened to panels in seconds with Perfolock clips. Remove or reposition as required. Hook ends capped for safety.

Single Spring Clips (Pack of 5)

Framework Benches

Simple and economic solutions to the need of production assembly, maintenance and despatch personnel.
18mm FSC compliant chipboard working surface (210kg UDL). Shelves on workstations carry 150kg UDL.
Robust uprights and light grey beam finish. Kits supplied with metal feet and full assembly instructions.

Engineers Workbenches

Available with the following worktop finishes.
Wisa - Laminated ply core with mid grey polypropylene face. An easy clean top with good resistance to oil, grease, mild alkalis and weak acids.
Mfc - Particle board core with light grey laminate face. A light duty easy clean top suitable for assembly or office environments.
Mpx - Laminated beech ply. A tough, general duty top suitable for most applications.

Framework bench

A tough steel section framework, braced and finished in RAL7035 grey epoxy powder coat.
The 30mm worktop is available in multiplex or wisa. Full range of accessories available, including overhead kits and suspended cabinets. Flat packed for self assembly.
Height: 780mm.

Toggle Clamp Spares

As Neoprene capped but suitable for clamping onto irregular shapes or angled workpieces.

Swivel Foot Spindles

Matlock Shelving and Racking

This is the heaviest duty Matlock all steel shelving/racking system available. The steel shelf panels have a massive 1,165kg UDL* capacity per shelf it is ideal for storage of large, heavy items (18 or 25mm chipboard shelves also available please contact us for prices)

Features include:
Open construction allows access from both sides.
High quality paint finish.
Up to 1,165kg UDL* capacity per shelf.
Self assembly Tools Required.

Please refer to the catalogue PDF for all dimensional information.


*Uniformly Distributed Load.

Longspan Heavy Duty Racking

Drawer Cabinets

Robust freestanding storage cabinets available in 2 widths. Can also be used as slide under pedestals for workbenches.
? Tough welded steel construction
? Finished in epoxy powder coat gre/blue
? 60kg load capacity per drawer
? All units are 500mm deep x 800mm high
? Fully lockable

750mm wide Drawer Cabinet

3x 75mm, 2x 125mm and 2x 175mm drawers

Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Precision Brand Steel Shims

All shims are marked with material type, size, thickness and a tracking lot number. Full hard, cold rolled, low carbon 1008-1010.
Hardness: <.069” thick Rockwell B90 min. >.070” thick Rockwell B84 min.
Conforms to: AISI-1008/AISI-1010.

Steel Shims - Inch Sizes

Air Gun Tool Kit

For use with hand air guns. Kit comprises of: 454mm extension rod, 140mm flared nozzle (with removable brush), 60mm diameter round brush and a crevice tool.

Precision Brand Steel Shims

All shims are marked with material type, size, thickness and a tracking lot number. Full hard, cold rolled, low carbon 1008-1010.
Hardness: <.069” thick Rockwell B90 min. >.070” thick Rockwell B84 min.
Conforms to: AISI-1008/AISI-1010.

Steel Shims - Inch Sizes