Carver Rack Clamps

Consist of a J shape notched bar and sliding jaw. Finished in a bright orange epoxy coating for durability. Uses include metal fabrication, welding, moulding box and die holding, pattern making, plastic and fibreglass moulding & plate fabrication. No long screws to bend, or critical working parts exposed to weld spatter. The action of tightening the clamps does not impose rotation to the workpiece. The jaws may be reversed and the clamp used in reverse action.

Heavy Duty Clamp

For all dimensional specifications please refer to our catalogue.

Engineers' Fully Welded Mobile Workbenches

Fully welded mobile benches - delivered ready to use. Choice of regular 2mm steel plate worktop or 20mm Beech layered worktop. Long life epoxy powder coat. Heavy duty steel framework with base shelf. Handle fitted to all mobile units. 125mm diameter castor set on mobile units. All units are 600mm deep and 910mm high.

1000mm Wide Workbenches

Mobile Bench with lockable drawer. Multiplex Beech Worktop Finish.

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Light Load Springs Colour-Coded Green

Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Workshop Tool Cabinets

Single width cupboards. Strong and versatile economy storage within the workshop. Fully welded construction with reinforced doors. Compact size of 500mm x 550mm x 1000mm for a variety of uses. 75mm high simple steel drawer unit with integral handle. Espagnolette 2 point locking with flush fitting handle. Adjustable shelves on 100mm pitch. Finished in epoxy powder coat - grey/blue

Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Horizontal Industrial Clamps

Features: Comfortable, cushioned PVC orange handle grips. Specification: The main components are of zinc plated and passivated steel. Rivets are of stainless steel, which burnishes and work-hardens with use, the rivets of the larger clamps rotating in hardened bushes or directly in the close-toleranced holes of hardened parts.

Bench Shears



Replacement Parts

Replacement Handle

Ball Bearing Super Chuck

Designed for extra heavy duty drill applications such as industrial drilling machines, jig borers, milling machines, lathes, radials and CNC/NC machining centres. Each chuck features ball bearing construction to maximise the gripping force and accuracy, through hardened sleeve teeth plus hardened nose and keyholes to provide wear resistance. The centre ground jaws are specially heat treated to ensure high gripping surface hardness.

Precision Brand Steel Shims

All shims are marked with material type, size, thickness and a tracking lot number. Full hard, cold rolled, low carbon 1008-1010.
Hardness: <.069” thick Rockwell B90 min. >.070” thick Rockwell B84 min.
Conforms to: AISI-1008/AISI-1010.

Steel Shims - Inch Sizes