Stainless Steel Shim

Precut 300 Series
The best way to solve alignment and levelling problems on motors, pumps, generators and other plant machinery! The pre-cut shims are safer and easier to position as the tab eliminates the need to place hands under machinery during installation or removal of the shim. Engineered for quality, all shim thickness tolerances meet industry standards and conform to standard bolt and stud sizes. Each shim is clearly marked with its thickness.

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Extra Heavy-Load Springs Colour Coded Yellow

Modular Coolant Hose System



Valves

Thread fittings fully compatible with BSPT. In-line check valves stop fluid drip when flow stops, keeping hose full and reducing initial dry cutting.

Silver Steel

For tool room and general engineering. Applications include screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel, engraver tools. High carbon content means that it can be hardened to give high wear resistance and chromium content adds strength and hardness.

Manufactured from
BS1407:1970 grade steel.

Typical hardness:
207-237HB with 285HB maximum.

Tensile strength:
45/55 T.P.S.I. (700/850 N/mm2).

Surface finish:
Better than 0.6 microns (25 micro inch) CLA (Centre Line Average).

Chemical analysis range:
Carbon 0.95 - 1.25%
Silicon 0.40% max
Manganese 0.25 - 0.45%
Phosphorous 0.045% max
Sulphur 0.045% max
Chromium 0.35 - 0.45%

Chemical analysis typical:
Carbon 1.13%
Silicon 0.22%
Manganese 0.37%
Phosphorous 0.014%
Sulphur 0.018%
Chromium 0.43%

Inch round sizes

Tolerances:
Below 1" plus/minus 0.00025".
1" up to and including 2" plus/minus 0.00050".

Matlock Shelving and Racking

Matlock Euro shelving is available in a range of sizes and configurations to meet your specific storage requirement. The heavy duty all steel shelving system has a 200Kg UDL* per shelf capacity making it ideal for industrial storage.

Features include:
The shelving bays are available with solid cladding or open/braced backs and sides. Shelve height is adjustable and are fitted on clips for easy repositioning.
High quality, light grey powder coat finish.
Biocote antimicrobial protection reduces levels of bacteria on surfaces by up to 99.99% .
Up to 200Kg UDL* capacity per shelf.
Self Assembly tools required.

Please refer to the catalogue PDF for all dimensional information.

*Uniformly Distributed Load

Open Bay Euro Shelving

Atlas? Machine Vices

Manufactured in accordance with stringent quality criteria and moving parts are tested for parallelism and perpendicularity in no less than eight tests - all to minute tolerances. All models are designed for milling, planing and drilling applications and are available with or without swivel bases (swivel base model illustrated).

Matlock? Industrial Racking and Shelving

Easy assembly shelving offering a fast and economic solution to storage and production problems. Shelves slot and lock into uprights removing the need for fasteners, fixings and tools. Supplied with 18mm chipboard shelves. Extra shelves are available on request. Shelving can be designed to suit your space requirements. Connector plates are required to construct shelving runs (four plates per join).
Standard Duty
Ideal for light to medium weight storage of archive boxes, bankers boxes, box files, arch files, magazine holders, paint tins and boxes of stock. Contents: four uprights, five shelf levels with J-beams, feet and assembly instructions. Supplied as graphite grey uprights with light grey shelves.

QuickRack Standard Duty Shelving Bay 1980x900x300mm (HxWxD)

Matlock QuickRack industrial standard duty racking and shelving is ideal for light to medium weight storage of archive boxes, bankers boxes, box files, arch files, magazine holders, paint tins and boxes of stock.

Contents: 4 uprights. 5 shelf levels with J beam shelf supports. Support feet and assembly instructions.
Maximum load per shelf: 375Kg

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Light Load Springs Colour-Coded Green

Archive Bays

Simple, strong and excellent value document storage bays offer easy record storage and retrieval. Assembles in minutes without nuts, bolts or rivets. Prices include boxes. Bays comprise of 4 uprights in choice of 3 colours, 3 shelf levels with 18mm FSC compliant chipboard supported by light grey channel and metal footplates. Assembly instructions included. Maximum shelf load 210kg.

Clamp Fixture Components

Material: Medium Carbon Steel. Hardness: HRC32-38. Surface Finish: Manganese Phosphate

CC06 - Tapped End Plain Clamp