Chuck Keys

Suitable for use with all industrial keyed chucks.

Kennedy® Supra-Rapid Clamping Industrial Keyless Drill Chucks

Fully hardened and ground working parts. The jaws are centre ground for alignment concentricity. Robustly designed for durability and wear resistance in the most arduous of industrial applications on stationary drilling machines. Unsuitable for reversing drills.

Senator® Parts, Component and Tool Storage Bins

Senator® high strength Polypropylene storage bins are designed to solve your storage problems, they are suitable for small to large component or part storage.

The versatile Senator® storage bin can be stand alone, nested on top of each other or hung on louvred panels allowing you to create the storage system to satisfy your specific requirement.

Senator storage bins are available in 3 sizes and a choice of blue, green, yellow or red and can be fitted with label holders (supplied separately).

For all dimensional specifications and accessories please refer to our catalogue.

Plastic Storage Bins

Size: 165 x 110 x 75mm.

Fixture Components

Material: Medium Carbon Steel. Hardness: HRC 32-38. Surface Finish: Manganese Phosphate.

FC06 - T-Slot Nut (Milled)

Precision Ground Flat Stock (18")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".

Steel Locker

Hat shelf and 2 x coat hooks fitted in the single door locker (450mm deep locker also has a hanging rail), 2 x coat hooks fitted in each compartment of the 2-tier locker. BSI Quality Assured (meet the requirements of British Standard for Clothes Lockers BS4680:1996 ?Standard Duty?).

Picture for illustration only not accurate for colour.

Indexa Die Springs

The heat and surface treatment plus the high quality of steel used in the manufacturing process ensure the springs will bear a high number of stresses without breaking or without appreciable loss of load. Every batch of springs is subject to a rigorous testing procedure to ensure that a consistent quality is maintained. Longer springs should be guided along their course.

Medium Load Springs Colour-Coded Blue

Precision Ground Flat Stock (500mm)

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Metric sizes

Tolerances:
Thickness: -0.00mm/+0.050mm.
Width: -0.00mm/+0.200mm.
Length: -0.00mm/+5.000mm.

Engineers Workbenches

The frame mounts securely to the bench leg of any static bench on this page. Backpanel is available in 3 types:
perforated, louvred or combi.
1115mm high (above worktop).
Twin tube 240v light.
200mm deep shelf.
457mm high steel panel.

Overhead kit

Bott Louvre Panel Racks

All models 1000mm wide x 550mm deep. Double or single sided versions. Complete with bin kits. Epoxy powder coat finish. Optional base tray available for all models.

1250mm High Mobile Rack - Double Sided

16917260.11V
Fittings: 40 piece hook kit.