Matlock™ Parts, Component and Tool Storage Bins

Matlock™ high strength Polypropylene storage bins are designed to solve your storage problems, they are suitable for small to large component or part storage. The versatile Matlock™ storage bin can be interlocked side by side, nested on top of each other, hung on steel louvred panel (supplied separately) or using riser rods (supplied separately) they can be stacked on top of each another, this functionality allows you to create the storage system to satisfy your specific requirement.

Matlock™ storage bins are available in seven sizes and a choice of four colours blue, green, red and yellow and can be fitted with label holders (supplied separately).

For all dimensional specifications and accessories please refer to our catalogue.

Plastic Storage Bins

Matlock™ Plastic Storage Bin Size: No.3A Dimensions 350x280x184mm(LxWxH)

Fixture Components

Material: Medium Carbon Steel. Hardness: HRC 28-32. Surface Finish: Manganese Phosphate.

FC07 - Engineers Stud

Heavy Duty Tool Storage System

Heavy duty industrial cupboards with double locking doors. Finished in epoxy powder coat RAL7035 with doors in blue RAL5010. Perforated door liners will accept tool holders. Security is ensured by a 3 point locking system. Shelves and drawers are adjustable on a 25mm pitch. Drawer dividers are available separately. Load capacity per shelf 100kg. 75kg U.D.L. capacity per drawer with 100% extension slides. Overall load capacity 1.5 ton.
Dimensions (W x D x H): 1050 x 650 x 2000mm.

Complete with 9x 125mm Drawer, 3x Shelf

Supplied with basic 2m high cupboard and two perforated door liners as standard.

Bott PPE & Janitorial Cupboards - Plain & Ventilated Doors

Specialist versions of the kitted cupboards. Three point locking doors. Galvanised shelves with 50kg UDL capacity. Roller bearing drawers with 50kg UDL capacity per drawer. Ventilated doors aid drying and allow quick visual stock check. Central vertical partition allows easy separation of clean/dirty items and gives space for tall products such as brooms or mops. Hanging rail options offers easy storage of clothes.
1 or 2m high, 500, 750 or 1000mm wide. All shelves adjustable on 25mm pitch.

Shelf Capacity 50kg Uniformly Distributed Load

Cupboards with Plain Doors

16916312.11V
Size (H x W x D): 2000 x 1000 x 550mm.
Number of shelves: 6.
Drawers left: no.
Drawers right: no.
Partition: yes.
Rails: no.

High Speed Steel Knurls

Precision hobbed to produce burr-free clean cut knurls.

Right Hand

Bott PPE & Janitorial Cupboards - Plain & Ventilated Doors

Specialist versions of the kitted cupboards. Three point locking doors. Galvanised shelves with 50kg UDL capacity. Roller bearing drawers with 50kg UDL capacity per drawer. Ventilated doors aid drying and allow quick visual stock check. Central vertical partition allows easy separation of clean/dirty items and gives space for tall products such as brooms or mops. Hanging rail options offers easy storage of clothes.
1 or 2m high, 500, 750 or 1000mm wide. All shelves adjustable on 25mm pitch.

Shelf Capacity 50kg Uniformly Distributed Load

Cupboards with Ventilated Doors

16916292.11V
Size (H x W x D): 2000 x 1000 x 550mm.
Number of shelves: 6.
Drawers left: no.
Drawers right: no.
Partition: yes.
Rails: no.

Free Standing Racks

Available in two heights and two widths. Made from 16swg channel section which supports Louvre Panels either single or double sided.
Colour: Dark grey/light grey

Silver Steel

For tool room and general engineering. Applications include screwdrivers, punches, shafts, axles, pinions, pins, die posts, instrument parts, model parts, taps and drills for mild steel, engraver tools. High carbon content means that it can be hardened to give high wear resistance and chromium content adds strength and hardness.

Manufactured from
BS1407:1970 grade steel.

Typical hardness:
207-237HB with 285HB maximum.

Tensile strength:
45/55 T.P.S.I. (700/850 N/mm2).

Surface finish:
Better than 0.6 microns (25 micro inch) CLA (Centre Line Average).

Chemical analysis range:
Carbon 0.95 - 1.25%
Silicon 0.40% max
Manganese 0.25 - 0.45%
Phosphorous 0.045% max
Sulphur 0.045% max
Chromium 0.35 - 0.45%

Chemical analysis typical:
Carbon 1.13%
Silicon 0.22%
Manganese 0.37%
Phosphorous 0.014%
Sulphur 0.018%
Chromium 0.43%

Inch round sizes

Tolerances:
Below 1" plus/minus 0.00025".
1" up to and including 2" plus/minus 0.00050".

Precision Ground Flat Stock (18")

The dimensional stability of ground flat stock combines with other useful characteristics including excellent resistance to cracking during heat treatment compared with other, more highly alloyed, cold work tools. Relatively soft and easy to machine. High wear resistance after heat treatment. Holds a good cutting edge. Suitable for EDM machining.
Typical applications: widely used in precision tools, machine knives, gauges, jigs, templates, punches, dies and machine parts.
The Cost Cutting Stock: extensive range of widths and thicknesses enables the selection of an appropriate size of ground flat stock to minimise material and machining costs.

Manufactured from BS4659 B01 grade steel equivalent to AISI 01 and Werk. No. 1.2510.
Chemical analysis range:
Carbon 0.90 - 1.00%
Silicon 0.40%
Manganese 1.00 - 1.20%
Chromium 0.50 - 0.70%
Tungsten 0.50 - 0.70%
Vanadium 0.05 - 0.25%

Chemical analysis typical:
Carbon 0.95%
Silicon 0.40%
Manganese 1.20%
Chromium 0.55%
Tungsten 0.55%
Vanadium 0.15%

Inch Sizes

Tolerances:
Thickness: -/+0.001".
Width: -0.00"/+0.005".
Length: -0.00"/+0.25".

Modular Coolant Hose System



Nozzles

Spray 90°, Flare, Pointed Straight, Pointed 90°